Paradyne 6800 manual Altos System, Hardware

COMSPHERE 6800 Series Network Management System

Altos System 15000

The Altos System 15000 is based on the EISA bus, featuring two Intel i80486 processors running at a clock speed of 50 Mhz. The following section describes the hardware and circuit cards that may be installed in the System 15000.

Hardware

The System 15000 is shipped to the customer with the processor, three memory modules, two hard disks, one CPU, two Emulex DCP/MUXi cards, and one IPC-1600 card.

Circuit Cards

Table 2-5 indicates the location of the standard and optional circuit cards installed in the System 15000. Preinstallation checks for the Ethernet card are the same for the System 15000 as for the System 5000.

Table 2-5

Altos 15000 Factory- and Field-Installable Circuit Cards

Slot	Card	Memory	IRQ	I/O Address	Description
		Address
2	IPC-1600	F00000ÐF0FFFF	11	110Ð11F	Provides 16 serial ports. Field
		(15m)			installed.
4	Emulex DCP/	DC000ÐDFFFF	Ð	33CÐ33F	Provides eight control channels that
	MUXi				monitor modem and DSU networks.
					Field installed.
5	Emulex DCP/	D8000ÐDBFFF	Ð	23CÐ23F	Provides a second set of eight control
	MUXi				channels for monitoring networks.
					Field installed.
6	ECA	Ð	10	6C80Ð6CAF	Supports Ethernet connection to the
					UIP and the full-feature workstation.
8	SCSI Controller	Ð	14	8C80Ð8CAF	Controls the hard disk(s), floppy disk,
					and cartridge tape drive.
9	Video	A0000ÐC7FFF	9	3B0Ð3DF	Provides VGA-level graphics.
				(Multiple)

2-30 January 1997 6800-A2-GN22-30