Paradyne 6800 manual Eisa Configuration Utility

COMSPHERE 6800 Series Network Management System

EISA Configuration Utility

The EISA Configuration Utility (ECU) is a program that is shipped with the 6800 NMS Applications software package and used to configure the System 5000 and System 15000 so that their resources match the requirements of the circuit cards you installed. The ECU is shipped on a floppy disk with separate disks for the System 5000 host, System 15000 host, and UIP.

To ensure that these cards function properly, you must run this program as soon as you have finished installing the cards in either the host or the UIP.

NOTE

To run the ECU, you must connect the display unit, keyboard, and mouse. For instructions, turn to the section entitled System Console in Chapter 4, Connecting the Components.

The EISA Configuration Disk contains the ECU program and configuration files. These configuration files describe all the circuit cards that could be installed on the Altos System 5000 or System 15000. Table 2-8 shows the names of the configuration files depending on the type of processor you have and the type of network connected to the processor.

Table 2-8

Configuration Files

	Diskette Title	Processor		Network Type	File Name
6800 NMS ECU		System 5000 Host		Ethernet	68005E.SCI
		System 5000	Host	Token Ring	68005T.SCI
6800	UIP ECU	System 5000	UIP	Ethernet	68005EU.SCI
		System 5000	UIP	Token Ring	68005TU.SCI
6800	NMS ECU (15000)	System 15000		Ethernet	680015.SCI

NOTE

￿￿￿￿ ￿￿￿￿￿￿ ￿￿￿￿￿￿￿ ￿￿￿￿￿￿ ￿ ￿￿￿￿￿￿￿￿￿ ￿￿￿￿ ￿￿￿￿￿￿ ￿￿￿￿￿ ￿￿￿"￿￿￿￿ ￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿ ￿￿ ￿￿￿"￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿ ￿￿￿ ￿￿￿ M￿￿￿￿ ￿!￿￿￿ ￿￿￿￿￿￿￿￿￿

￿"￿￿￿￿￿￿ ￿￿￿￿￿ ￿U￿P￿￿ "￿￿￿￿￿￿ ￿￿￿ #￿ ￿￿ ￿￿￿￿￿￿ ￿￿￿￿￿ ￿￿￿"￿￿￿￿ ￿￿￿￿ ￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ #￿ ￿ ￿￿￿￿￿ ￿￿￿ ￿￿￿￿￿"￿ ￿￿￿￿ ￿￿￿￿￿￿ ￿￿￿￿ ￿￿￿ ￿￿￿￿ ￿￿￿￿￿￿￿

￿h￿￿￿i￿￿￿ ￿h￿￿ ￿o￿￿￿￿ ￿i￿￿￿ ￿o￿￿i￿￿￿￿￿io￿￿￿￿ ￿￿￿￿￿￿ ￿￿￿ ￿￿￿￿ ￿￿￿"￿￿￿

￿￿￿￿￿￿￿#￿

2-46 January 1997 6800-A2-GN22-30