Paradyne 6800 manual Automatic Trouble Report Feature, ATR Connection

Connecting the Components

Automatic Trouble Report Feature

The Automatic Trouble Report (ATR) feature provides a remote printer at the Paradyne technical assistance center to print user-defined alert reports. The customer is responsible for connecting a 2224CEO or 3810 modem to the ATR port. The diagram in Figure 4-22 illustrates the ATR connection.

To connect the ATR to the host processor, you will need the following items.

•2224CEO or 3810 dial modem

•035-0153-0031 cable

•002-0039-0031 connector

Perform the following steps:

1.Connect the grounded end of the 035-0153-0031 cable to an available port on the IPC-1600 card in the host processor.

2.Connect the other end of the 035-0153-0031 cable to the 002-0039-0031 connector.

3.Connect the 002-0039-0031 connector to the 2224CEO or 3810 modem.

4.Connect the 2224CEO or 3810 modem to the Network Channel Terminating Equipment (NCTE).

Refer to Appendix A, Modem Settings, for information on optioning 3810, 3811, 3820, or 2224CEO modems for this application.

Figure 4-22. ATR Connection

6800-A2-GN22-30 January 1997 4-45