Paradyne 6800 manual Nnn.nnn.nnn.nnn portname

COMSPHERE 6800 Series Network Management System

2.Using the vi editor, add the IP address and the name of the router port connected to the host or UIP to the /etc/hosts file in the format:

nnn.nnn.nnn.nnn port_name

Where: nnn is a number from 1 to 255 inclusive. port_name is the name of the router port.

3.Using the vi editor, add the following line at the bottom of the /etc/rc2 file: route add default port_name 1

Where: port_name is the name of the router port.

4.The command change in Step 3 takes effect when the host or UIP is rebooted. If you want it to take effect immediately,

TYPE: route add default port_name 1

Where: port_name is the name of the router port.

PRESS: Enter

5.On the full-feature workstation, edit the \/X-ONE\/HOSTS file and add the IP address and name of both the router port to which the full-feature workstation is connected and the router port to which the NMS host or UIP is connected in the format:

nnn.nnn.nnn.nnn port_name

Where: nnn is a number from 1 to 255 inclusive. port_name is the name of the router port.

6.On the full-feature workstation, edit the \/X\/ONE\/TCP.CFG file and set up the default route for the remote port to which the full-feature workstation is connected and the local port to which the NMS host or UIP is connected. Add the following lines:

name=remote_port_name ; gateway=1 name=local_port_name ; gateway=2

Where: remote_port_name is the name of the router port to which the full-feature workstation is connected.

local_port_name is the name of router port to which the NMS host or UIP is connected.

Be sure that there is a space both before and after the semicolon.

5-84 January 1997 6800-A2-GN22-30