Paradyne 6800 manual Installing MS-DOS, EtherLink II Configuration, StarLAN 10 NAU Configuration

COMSPHERE 6800 Series Network Management System

EtherLink II Configuration

•Installing MS-DOS

•Installing the GrafPoint X-One software package with EtherLink II card

•Installing the NMS full-feature workstation application software with EtherLink II card

•Network configuration of full-feature workstation

StarLAN 10 NAU Configuration

•Installing MS-DOS

•Installing the GrafPoint X-One software package with a StarLAN 10 NAU

•Installing the NMS full-feature workstation application software with StarLAN 10 NAU

•Network configuration of full-feature workstation

Token Ring Configuration

•Installing MS-DOS

•Installing the GrafPoint X-One software package with a StarLAN 10 NAU

•Installing the NMS full-feature workstation application software with StarLAN 10 NAU

•Installing the Token Ring software on the full-feature workstation

•Network configuration of full-feature workstation

Installing MS-DOS

A full-feature workstation requires the MS-DOS Operating System. For workstations supplied by Paradyne, the workstation software is initially loaded at the factory. You may have to reload this software because of hard disk failure or system upgrade. When reloading, it is advisable to reformat the hard disk before installing the software.

To reformat, create a bootable disk by using the format /s command. Then copy the format command (found on the MS-DOS Operating System disk) onto the bootable disk. Boot the system from the bootable disk and execute the format command on the hard disk.

Once the hard disk has been reformatted, remove the rebootable disk and locate the three MS-DOS Version 5.0 disks labeled Setup, Disk 1, and Disk 2.

NOTE

If upgrading a full-feature workstation, you can use MS-DOS 3.30a.

Reformat the disk and load MS-DOS with the command insl/dos.

Use the following procedures to install MS-DOS.

1. Insert the disk labeled 1 of 3 into Drive A and turn on the power to the computer.

5-60 January 1997 6800-A2-GN22-30