Paradyne 6800 manual Changing 6510 Parameters, Do you wish to see a system summary? y or n

Loading and Restoring Software

9.After the requested ANALYSIS controller(s) is added, the system displays the following message:

Do you wish to see a system summary? ( y or n)...

If you respond with y (yes), the system displays a list in the following format:

System Name	CC Name	Port #	# Cut-Throughs
ªnameº	a1	ªvalueº	ªvalueº
ªname2º	a2	ªvalue2º	ªvalueº

Please note! For the changes you have made to take effect, the NMS system must be shut down and then restarted.

10.Program execution is completed and the system displays the UNIX prompt. You must shut down the NMS system and reboot the host computer. See Chapter 6 for detailed instructions on how to reset the host computer.

Changing 6510 Parameters

The following procedure provides information on changing the parameters for an existing 6510.

1.The ANALYSIS Selection menu (Figure 5-10) is displayed on your screen. The letter n represents the number of ANALYSIS 6510's already configured.

Maximum ANALYSIS 6510s supported = 6 n Analysis 6510(s) already installed

Do you wish to:

1.Add a 6510 to the system

2.Remove a 6510 from the system

3.Change a 6510's parameters

4.Exit program

Enter a number from 1-4...

492-13958-01

Figure 5-10. ANALYSIS Selection Menu (for Changing 6510 Parameters)

To change the parameters for an existing 6510,

TYPE: 3

PRESS: Enter

6800-A2-GN22-30 January 1997 5-97