Paradyne 6800 manual Configuring 3810, 3811, and 3820 Modems, CEO Modem

Modem Settings A

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 3810, 3811, and 3820 Modems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 2224-CEO Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Configuring 3810, 3811, and 3820 Modems . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Hardware Option Settings for the 2224-CEO . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Software Configuration Option Parameters for the 2224-CEO . . . . . . . . . . . A-3 Locking Option Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Overview

3810, 3811, and 3820 Modems

The 3810, 3811, and 3820 modems provide a user friendly diagnostic control panel (DCP) for configuration. Please see the section Configuring 3810 Modems in this appendix to configure these modems.

2224-CEO Modem

The 2224-CEO modem has both hardware option switches and software configuration option parameters that control its operation. This appendix describes the recommended settings for both hardware and software options.

Use this information as general guidelines. Different values are possible, and other modems may be used.

Configuring 3810, 3811, and 3820 Modems

To configure 3810, 3811, and 3820 modems, perform the following steps at both the host and remote ends of the modem pair.

1.Select Configure from DCP using the right arrow key.

2.Select Factory using the right arrow key.

3.If the modem is used for ATR, select UNIX dial using the right arrow key. If the modem is used for remote workstation access, select Async dial using the right arrow key.

4.Select Edit (F1).

6800-A2-GN22-30 January 1997 A-1