Paradyne 6800 manual Configuration, Do you want the kernel to boot by default? y/n Type y

Loading and Restoring Software

9.The system displays the following prompt:

Do you want the kernel to boot by default? (y/n): TYPE: y

PRESS: Enter

10.The system displays the following prompt:

Do you want the kernel environment rebuilt? (y/n): TYPE: y

PRESS: Enter

11.Shut down and reboot the system: TYPE: cd /

PRESS: Enter

TYPE: shutdown -g0 -y -i6

The command will shutdown and reboot the system.

NOTE

If you are migrating a database to Release 4.2, you must perform the migration before configuring your ANALYSIS network on NMS.

Configuration

After the ANALYSIS Gateway software is installed, the NMS application program must be started, and then the configuration data can be entered. After the data is entered, the NMS system must be rebooted.

1.After the ANALYSIS Gateway software is initialized the UNIX # prompt appears. At this prompt,

TYPE: su \M nms

PRESS: Enter

2.The Network Management System Menu appears. Select Start the system, TYPE: 1

PRESS: Enter

3.When prompted to continue, PRESS: Enter

6800-A2-GN22-30 January 1997 5-93