Image Scanner User's Manual

- 20 -

¡ Others

If a problem occurs that is not indicated by the indicators, follow the directions below.

Cause
Power cord is not plugged in.
Power switch is not turned on.
I/F cable is not connected securely.
Host computer malfunction.
SCSI ID is not correct.
DIP switches setting is not cor-
rect.
The roller is not clean.
Specifications of originals do not
match with the document condi-
tions.
The contact glass is not clean.
The roller is not clean.
Problem
Power does not
go on.
Does not run af-
ter power is on.
Originals are not
fed normally.
Scanned image
is abnormal.
Corrective action
Plug the power cord in.
Turn on the power.
Connect it securely.
Reset the computer.
Correct the SCSI ID.
Correct the DIP switches
setting.
Clean the roller.
Place originals which
match the document con-
ditions.
Clean the contact glass.
Clean the roller.
Refer
P.7
P.8
P.6
-
P.7
P.8
P.15
P.12
P.14
P.15
¡ System error
Scanner Document feeder
Green Amber Green Amber
Blinking Blinking Blinking Blinking

Corrective action

Initialize the scanner by switching the scanner off and on again or press the reset switch.

If the error is not solved, please contact your service representative.

03_IS430-BODY 97.5.8, 5:36 PMPage 20 PageMaker 5.0J