Image Scanner User's Manual
¡ Placing originals on the document table
Original condition
Originals that meet the following specifications can be handled by the document feeder.
Caution: When an original needs to be scanned that does not meet the following specifications, place the original on the contact glass and scan in book mode, otherwise your original may be damaged.
ESize: | Length: | 120 ‘ 432 mm |
|
|
|
|
|
|
|
| ||||
| Width: | 69 ‘ 297 mm |
|
|
|
|
|
|
|
| ||||
EWeight: | 11.2 lb ‘ 34.1 lb (42 g/m2 ‘ 128 g/m2) | |||||||||||||
EStack: | All originals must be the same width | |||||||||||||
| Height is less than 12 mm |
|
|
|
|
|
|
|
| |||||
| (Ex: 20lb paper~100, 24lb paper~85) | |||||||||||||
EPaper: | Bond paper, PPC paper, or art/coating paper | |||||||||||||
EThickness: | 0.07 ‘0.16 mm |
|
|
|
|
|
|
|
| |||||
EWritten material: | Toner, pencil, marker ink, water sign pen, ball point pen or ink that does not | |||||||||||||
| adhere to the contact glass and the roller. Ink must be dry. | |||||||||||||
ECurl: | Back curl: | Less than 5 mm | Face curl: Less than 10 mm | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If curled, flatten it within the above levels.
EOthers:No tears, wrinkles, perforations, and pastes. No projections such as a clip or staple.
No folds within the following area.
Folds should not be on this area | c feeding direction |
because the optical sensor |
watches this area of an original.
center
10mm
1 mm
- 12 -
Page 12 | 97.5.8, 5:36 PM | PageMaker 5.0J |
