BellSouth S02294A user manual ¡ Placing an original on the contact glass, Original condition

Image Scanner User's Manual

￿¡ Placing an original on the contact glass

Original condition

Originals that meet the following specifications can be scanned.

￿EWeight:	Less than 10 kg per document (Letter or A4)
￿EThickness:	Less than 10 mm (If document feeder is open, more than 10 mm is possible.)

￿EWritten material: Pencil, toner, ink, ball point pen, anything that does not stick to the contact glass.

Procedures

1. Open the document feeder.

Caution: Don't press on the contact glass

strongly, otherwise it might break.

Placing originals

2.Put the original face down on the contact glass. Place the upper left edge of the origi- nal at the document set origin.

3.Close the document feeder slowly.

Caution: Keep your fingers away from the

hinge when closing the document

feeder.

Document set origin

- 11 -

03_IS430-BODY Page 11 97.5.8, 5:36 PM PageMaker 5.0J