Paradyne 6800 manual Removing a 6510 Configuration, Type y Press Enter

Loading and Restoring Software

6.When asked to display the system summary, TYPE: n

PRESS: Enter

7.Reset the host computer. Refer to Chapter 6, System Start-up and Shutdown.

Removing a 6510 Configuration

The following procedure provides information on removing a 6510 configuration from the 6800 Series NMS database.

1.The ANALYSIS Selection menu (Figure 5-11) is displayed on your screen. The letter n represents the number of ANALYSIS 6510's already configured.

To remove a 6510 configuration from the 6800 Series NMS database. TYPE: 2

PRESS: Enter

2.The system displays the following message:

Warning! The following steps will be taken if you continue.

1.The 6510 support software in the 6800 NMS will be stopped.

2.All Historic Alert records and Trouble Tickets for the 6510 and its devices will be deleted from the NMS database.

3.All Facility Profiles having the 6510 or its devices at both endpoints (point-to-point circuits) will be deleted.

4.NOTE! Facility Profiles and bridging devices related to multipoint circuits will NOT be deleted.

Do you wish to continue? (y or n)...

TYPE: y

PRESS: Enter

3.The following message appears:

Please select the 6510

1.ªSystem nameº

2.Cancel operation

Enter a number from 1 to 7 depending on the number of 6510's already configured

TYPE: number of the system to be removed

PRESS: Enter

6800-A2-GN22-30 January 1997 5-99