Paradyne 6800 manual Fujitsu DL5600, DL5600 Ð Front Control Panel

COMSPHERE 6800 Series Network Management System

Fujitsu DL5600

The Fujitsu DL5600 is a multicolor dot matrix printer. To modify its default settings, you use the buttons on the front control panel. This panel is shown in Figure 3-1.

The following procedure explains how to use the front control panel to modify the settings:

1.Remove the printer from its carton, connect the power cable to the printer, plug the power cable into an outlet, and turn the printer's power on. (For detailed instructions, consult the Fujitsu DL5600 Dot Matrix Printer User's Manual that comes with the machine.)

2.Once the printer has been powered on, you can modify its settings. To do this, you must first put the printer in SETUP mode. Press the RESET and ONLINE buttons at the same time. The message

SETUP MODE

will appear in the display area of the front control panel. This message is then replaced by the message

FUNCTN:SEL.MENU

3.SETUP mode consists of a number of functions. The first function is referred to as MENU1. To access this function, press the FF button. The message

MENU1

will appear in the display area. The MENU1 function consists of 22 individual printer settings. These settings are shown below along with the correct value for each setting (these values are correct for both serial and parallel connections to the host processor).

Figure 3-1. DL5600 Ð Front Control Panel

3-2 January 1997 6800-A2-GN22-30