Connecting the Components

To establish the file export connection that will provide device profile, site profile and facility profile information, perform the following steps:

1.Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is configured for file export.

2.Connect the other end of the 035-0153-0031 cable to the 002-0040-0031 connector.

3.Connect the 002-0040-0031 connector to the appropriate port on the ACCUMASTER Integrator.

To establish the UAI connection that will transmit alarms, perform the following steps:

1.Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is configured for UAI.

2.Connect the other end of the 035-0153-0031 cable to the 002-0040-0031 connector.

3.Connect the 002-0040-0031 connector to the appropriate port on the ACCUMASTER Integrator.

To establish the ACCUMASTER cut-through connection that is used by the Integrator operator to cut through to the 6800 Series NMS, perform the following steps:

1.Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is configured as a remote terminal.

2.Connect the other end of the 035-0153-0031 cable to the 002-0040-0031 connector.

3.Connect the 002-0040-0031 connector to the appropriate port on the ACCUMASTER Integrator.

6800-A2-GN22-30

January 1997

4-47

Page 151
Image 151
Paradyne 6800 manual Connecting the Components