Paradyne 6800 manual Installing Circuit Cards in the System, Altos 5000 Disk Bay

Preparing the Processors

3rd Hard Drive

Cartridge Tape Drive

Floppy Disk Drive

494-14506

Figure 2-8. Altos 5000 Disk Bay

Installing Circuit Cards in the System 5000

The System 5000 contains eight EISA expansion slots. Figure 2-9 shows the position of all the expansion cards within the System 5000 host processor.

Each card should be installed in a specific slot. Table 2-1 gives the proper slot assignments for each card for the host processor.

To insert the circuit cards into a slot, perform the following steps:

1.Locate the eight EISA slots inside the System 5000 (see Figure 2-9).

2.Take the first circuit card you intend to install and locate the proper slot for that card (see Table 2-1).

3.Remove the slot cover screw and the slot cover for the slot in which you intend to install the card. Save the screw for later in this procedure. Save the slot cover in case the circuit card is removed in the future.

6800-A2-GN22-30 January 1997 2-15