Paradyne 6800 manual System displays status messages and then request

Loading and Restoring Software

The system prompts for confirmation:

Add chain altos_tcp -> aaa (y/n):

TYPE: y

PRESS: Enter

The system displays status messages and then request:

Please enter the following information in order to configure en0

Enter the internet address of this interface:

TYPE: internet address

in the form nnn.nnn.nnn.nnn Where: nnn is an integer from 1 to 255 PRESS: Enter

The system prompts:

Enter the netmask for this interface (default: 255.255.0.0):

NOTE

Consult your System Administrator to determine whether to specify a net mask, a broadcast address, or DOMAIN name different from the default. Choose the default when using the basic network configuration as described in the Network Pre-Installation Preparation section.

PRESS: Enter

The system prompts:

Does the interface use a broadcast address of all 1's? (y/n) (default:y):

PRESS: Enter

The system prompts:

Enter the broadcast address for this interface (default: nnn.nnn.255.255):

PRESS: Enter

The system asks for verification of the previously entered values:

Interface Address:

Netmask:

Broadcast Address:

Are these values correct? (y/n):

6800-A2-GN22-30 January 1997 5-33