Paradyne 6800 manual Installing Token Ring Software on the NMS Host/UIP, Type cd Press Enter

Loading and Restoring Software

TYPE: cd /

PRESS: Enter

TYPE: shutdown -g0 -y -i6

PRESS: Enter

The command will shutdown and reboot the system.

Installing Token Ring Software on the NMS Host/UIP

The Token Ring package is an optional feature that can only be installed on an Altos 5000 platform. Do not proceed with this procedure unless the Token Ring LAN feature was purchased.

To install the Token Ring software on the NMS host processor or UIP, perform the following steps:

1.At the # prompt, initiate a shutdown and automatic reboot by entering the following commands:

TYPE: cd /

PRESS: Enter

TYPE: shutdown -g0 -y -i6

PRESS: Enter

The system reboots; at the following message:

Type (CONTROL-d) to proceed with normal startup (or give root password to enter system maintenance):

TYPE: root password

PRESS: Enter

2.When the UNIX root prompt (#) appears: TYPE: custom

PRESS: Enter

3.The custom installation menu displaying ªProducts Currently Installedº appears. The command Install should be highlighted at the top of the screen. If it is not, use the ↓↑ keys to highlight it and

PRESS: Enter

4.The product selection menu appears. Using the ↓↑ keys, select A New Product and PRESS: Enter

5.The install option menu appears. Select Entire Product and PRESS: Enter

6.Insert the Token Ring Host/UIP Application floppy into the floppy drive when instructed to by the custom installation procedure and

PRESS: Enter

6800-A2-GN22-30 January 1997 5-35