Manuals / Paradyne / Computer Equipment / Switch

Paradyne manual Release 4.2 6800 NMS Main Menu appears. To continue

Models: 6800

1 351

Download 351 pages 51.03 Kb

Page 310

Performing Migration

19.At the Console Login: prompt,

TYPE: nms

PRESS: Enter

TYPE: The nms password (the default is startmenu)

PRESS: Enter

The Release 4.2 6800 NMS Main Menu appears. To continue,

TYPE: 1

PRESS: Enter

to select Start the System.

The following message appears:

Starting the AT&T Paradyne NMS system. Please wait...

The system performs database error checking and then starts the NMS. When the start-up is complete, the following message appears:

The AT&T Paradyne NMS system has been successfully started. Press RETURN to continue

20.To continue, PRESS: Enter

The Release 4.2 6800 NMS Main Menu appears.

21.To return to the Console Login: prompt,

TYPE: 11

PRESS: Enter

22.At the Console Login: prompt,

TYPE: nms

PRESS: Enter

TYPE: The full-feature workstation password

PRESS: Enter

The NMS application is brought up and the NMS login window appears.

6800-A2-GN22-30

January 1997

7-39

Image 310

Paradyne manual Release 4.2 6800 NMS Main Menu appears. To continue

Contents

Area Code Change Comsphere 6800 Series Network Management System Trademarks Warranty, Sales, and Service InformationCopyright 1997 Paradyne Corporation. All rights reserved Important Safety Instructions FC F C F CC Table of Contents Connecting the Components Running Diagnostics List of Figures Comsphere 6800 Series Network Management System Vii List of Tables Objectives And Reader Assumptions AbstractRelated Documents Documentation ConventionsTypeface Communications Products Support Command Reference Manual Introduction OverviewWith UIP Ð 5000 Host 5000Altos Selecting a Site Contents List NMS Application Software User Interface ProcessorOptional Components License AgreementsUser Documentation in addition to this manual Full-Feature WorkstationsBasic-Feature Workstations PrintersPreparing the Processors Overview Altos System 5000 Host HardwareCircuit Cards Address DescriptionOpening the System 5000 Host System 5000 Ð Cover FastenersSystem 5000 Ð Disengaging Cover Locking Pins Preinstallation Checks for the Integral Ethernet Card Integral Ethernet CardOptional Host Upgrade Packages Second and Third Hard Disk Jumper Settings Preinstallation Steps for the Analysis NMS Package IPC-900 Ð Switch and Jumper LocationsPreparing the Processors Emulex DCP-286i Ð Switch and Jumper Locations Preinstallation Steps for the 16 Control Channel Package DCP/MUXi Ð I/O Address Switch Settings SWI DescriptionPreinstallation Checks for the Token Ring Card Optional Host Upgrade ProceduresInstalling the Third Hard Drive in the System Installing Circuit Cards in the System Altos 5000 Disk BaySystem 5000 Ð Expansion Slots Installing the Octopus Cable Assembly 10. Emulex DCP/MUCi Ð Circuit Card and Cable AssemblyConverting Host Processor R3.x to R4.2 Connecting the Ethernet Card to the NetworkClosing the System Installing the 16-Port Cabinet Assembly 11 -Port Cabinet Assembly12 -Pin Headers P3 and P4 Connector Identification 13. IPC-1600 Ports Cabinet Assembly Altos System 5000 UIPInstalling Additional Memory on the System Opening the Altos 5000 UIPType Boot Preinstallation Checks for the Integral Ethernet CardPress Enter Optional UIP Upgrade Packages Serial Port Upgrade Package for the UIPPreinstallation Steps for the IPC-1600 Upgrade Card 14. IPC-1600 Ð Switch and Jumper Locations and SettingsOptional UIP Upgrade Procedures Converting Altos 5000 Processors to Release 4.2 UIPsUIP Conversion Procedures Closing the Altos 5000 UIPInstalling the 16-Port Cabinet Assembly Altos System Opening the System 15. System 15000 Ð Removing the Top Cover 16. System 15000 Ð Removing the Side Panel 17. System 15000 Ð Removing the Front Panel Installing the MPX Processor 18. Altos 15000 Main Processor Card and MPX19. Altos 15000 Motherboard and Bus Connectors Installing the Second and Third Hard Disks on the System Installing the Second and Third Hard Disks in the System 20. Altos 15000 Showing the Hard Disk Bay21. Altos 15000 Memory Board and Memory Modules Preinstallation Steps for the IPC-1600 Card on the System IPC-1600 Ð Memory Switch Settings DSI SwitchesPreinstallation Steps for the DCP-MUXi Cards on the System DCP-MUXI Ð I/O Address Switch Settings Description22. System 15000 Ð Expansion Slots Closing the System 23. System 15000 Ð Top Cover Locking Pins Running Cmos Setup on the Altos Press EscEisa Configuration Utility Press spacebar to interrupt autoboot To select boot from floppy25. Main Menu Loading configuration files Please wait Type d Changing the Token Ring ConfigurationType Full-Feature Workstation Preinstallation Checks for the EtherLink II CardInstallation of the Token Ring Network Interface Card Token Ring I/O Address Switch Setting SwitchesSwitching off the Cache on 486DX 28. Proteon p1392 Card6386/25 Circuit Cards to Be Removed Release 29. NAU Memory Jumper Locations and Settings Want to QUIT? Full-Feature Workstation Comsphere 6800 Series Network Management System Preparing the Printers Fujitsu DL5600 DL5600 Ð Front Control Panel11.0 10 CPILPI SET8NONE BIT9600 Fujitsu DL3400 DL3400 Ð Front Control PanelDL3400 Ð Setup Mode Opening Menu 10CPI Cour13.6INCH Comsphere 6800 Series Network Management System Fujitsu DL3600 DL3600 Ð Front Control PanelEmulate DPL24C+ Font Cour Quality Letter Pitch DL3600 Ð Hardware Settings Correct Value DX2300 Ð Memory and Serial Interface Card Access Fujitsu DX2300DX2300 Ð Memory Card Settings Memory Card DIP Switch Settings Function DX2300 Ð Serial Interface Card Settings 9600 Baud Serial Interface Card Settings Switches 1Ð5 Function Serial Interface Card Settings Switches 6Ð8 SpeedItoh C-240 Printer Functions Printout Function No Menu No Status Network Printers Configuring Network PrintersRemote Printing with the Unix SCO/S5R4 Print Spooler Press Enter Press Esc Aaaa /usr/spool/lp/bin/rlpcmd bbbb /usr/bin/lp ± d ccccIPaddress localhostname Remote Printing with the BSD Unix Print SpoolerIP-address remotehostname Do you wish to continue?System then prompts Would you like this to be the system default printer? y/n Connecting the Components Overview System Console Altos System 5000 Ð Display Unit, Keyboard, and Mouse PortsAltos 5000 Full-Feature Workstation Configuration Altos System 15000 Ð Display Unit, Keyboard, and Mouse PortsConnecting the Components Connecting the Second Full-Feature Workstation Local Area Network with Second Full-Feature WorkstationNetwork Hub Unit Connecting the Third Full-Feature Workstation Local Area Network with UIPLocal Area Network with Additional Full-Feature Workstations Altos 15000 Full-Feature Workstation Configuration Connecting the Basic ConfigurationConnecting Additional Full-Feature Workstations Cascading Network Hub Units Altos 15000 Cascaded Network Hub Units Basic-Feature Workstation Cascaded Hub Cable Modifications End Connects To10. Basic-Feature Workstation Configurations 11. Basic-Feature Workstation Configurations Connecting a Local AT&T 6286 or Connecting a Remote AT&T 6286 orPrinters NMS Printer Models FunctionConnecting a Local System Printer DL3400/DL3600DL5600 Connecting a Remote System PrinterConnecting an Alert Log Printer DX2300Connecting the Dedicated Automatic Trouble Report Printer 240Connecting Modems and DSUs Data Communications EquipmentUsing a Hubbing Device 13. Daisy ChainConnecting Locally 14. Local Control Channel ConnectionsMaterials Required Connecting Remotely 15. Remote Control Channel ConnectionsConnection Procedures Connecting Acculink Multiplexers Configuration Options16. Connections for 719 Networker to Host Processor 17. Connections for Two Local Acculink Multiplexers One Local Acculink Multiplexer and One 719 Networker Connection Procedures 19. Connections for One Local Acculink MultiplexerConnecting the Current Version 719 Networker Connecting the Earlier Version 719 Networker Connecting the 719 Networker to the 74x Multiplexer External Systems20. External Systems Connections Connecting a Local System Controller Connecting a Remote System ControllerConnecting a Local Dial Backup Control Unit Connecting a Remote Dial Backup Control UnitConnecting a Local Service Restoration Control Unit Connecting a Remote Service Restoration Control UnitConnecting a Local DCX Multiplexer Connecting a Remote DCX MultiplexerConnecting a Computer System Requiring VT100 Emulation Connecting Remotely Connecting Locally Netview/PCConnecting Remotely Automatic Trouble Report Feature 22. ATR ConnectionAccumaster Integrator Connecting the Components 24. Accumaster Integrator Remote Connection Connecting the Components Analysis Network Management System Connecting the Analysis 6510/5605 Connecting the Analysis26. Analysis 6510/5605 and 5600 Remote Connection Connecting the Analysis 6510/5605 StarKeeper Network Management System 27. StarKeeper ConnectionConnecting Remotely Connecting the Host Processor to the Bytex UMS Bytex UMSConnecting the UIP to the Bytex UMS Loading and Restoring Software MPX Multiprocessing Software Full-Feature Workstation SoftwareBasic-Feature Workstation Software UIP Application SoftwareOrder of Installation Network Preinstallation Preparation Basic Network ConfigurationCustomized Network Configuration Inserting the Software Media Unix Software for the Host ProcessorPress space bar to interrupt autoboot System 5000 Boot Menu Installing Unix on Host ComputerInstallation Procedure Menu Installing Unix on Host Computer Hardware Configuration Menu Installing Unix on Host Computer Re-enter new password New passwordEnter your activation key or enter q to quit Init Single User Mode Done reading tape Enter the system node name or enter return to use unixSelect next level of chain to Add or q to quit Adding altostcp aaa Enable aaa driverSelect top level of chain to Add or q to quit Add chain altostcp aaa y/nOAddrRange Interface 6c80\N6caf DisabledInstalling Altos TCP/IP over aaa Press Enter to continueEnter the internet address of this interface Enter the netmask for this interface defaultInternet Address Netmask Broadcast Address Strike Enter when ready Do you want to relink the kernel now?System displays the following prompt Do you want this kernel to boot by default? y/n Type y Do you want the kernel environment rebuilt? y/n Type yInstalling the MPX Software on the Altos Press Cntl-dDo you wish to create a new kernel now y/n? Type y Enter your Altos MPX serial numberEnter your Altos MPX activation key Press any key to continueInstalling the NMS Software Release 4.2 NMS SoftwareInstalling NMS Release Etc/tzType help85 Press Enter How many UIPs do you have 0, 1, or 2 Type n Do you wish to have the screen-saver capability y/n n Type cd Press Enter3rd hard disk is already installed Safe to Power Off Press Any Key to RebootFormatting the Third Hard Disk Installing the 3rd hard disk. Please wait Do you want to install a 3rd hard disk? y/n/qSoftware installation of the 3rd hard disk is complete Initializing the NMS Database Type rootNMS Parameters Menu Ð Options Option ExplanationNetwork Configuration of NMS Host Nnn.nnn.nnn.nnn uip-nameNnn.nnn.nnn.nnn ffw-name Press Press Enter Altostcp aaa Select a chain to removeRemove altostcp aaa y/n System displays status messages and then request TCP/IP Configuration Complete Do you want this kernel to boot by default? y/n?Installing Token Ring Software on the NMS Host/UIP Configuring the Token Ring Network on the 5000 Host/UIP Products Currently Installed menu appears Type qSelect top level of chain to Add or q to quit Type Add chain altostcp-pro0 y/n Type ySystem prompts for the card slot number If nn is 99, sufficient pseudo ttys are already configured Do you want to relink the kernel now? Type y System 5000 Boot Menu Installing Unix on UIP Unix Software for the UIPInstallation Procedure Menu Installing Unix on UIP Hardware Configuration Menu Installing Unix on UIP Press any key Strike enter when ready or Esc to stop Press Enter Add chain altostcp en0 y/n Interface Address Netmask Broadcast Address Is there an IPC1600 card installed in the system? y/n Press ReturnPress Ctrl-d UIP Software Type y or n as appropriate to your location Type What is the name of the NMS Host machine? Building NMS fontsDo you want the kernel environment rebuilt? y/n appears Network Configuration of NMS UIPNnn.nnn.nnn.nnn host-name Type Altostcp en0 Select a chain to remove Remove altostcp en0 y/nType q Press Enter Do you want this kernel to boot by default? y/n Installing Token Ring Software on the UIPConfiguring the Token Ring Network on the UIP Do you want to relink the kernel nowFull-Feature Workstation Software DEVICE=C\/DOS\/EMM386.EXE 2048 M4StarLAN 10 NAU Configuration Installing MS-DOSEtherLink II Configuration Token Ring ConfigurationEnter the destination drive to use C Press Enter Enter the floppy drive to use a Press EnterEnter the destination directory to use \/XONE Press Enter Do you wish to install the OpenWindows fonts y/n? n Do you wish to install the fonts y/n? n Type yDo you wish to install the 100DPI fonts y/n? n Type y Do you wish to install the DecWindows fonts y/n? nReady to execute setup Press any key to continue Press Enter One Setup Utility Press any key to continue Press EnterSelect Monitor Size Inch Other Enter selection of `q to Quit Insert the proper disk and Press Enter System responds Enter this systems IP address Enter I/O Address in hexType Press Enter Enter a subnet mask255.0.0.0One Setup is now finished Press Enter Type edit XONE.CFG Type y Press Enter Do you wish to install the DecWindows fonts y/n? n Type Type appropriate number Enter a subnet mask System asks One install complete Press any Key to continue Files extracted Press any Key to continueType edit autoexec.bat Proteon LAN Support Setup \PROTEON Selection menu for board type appears LSP Software Setup Completed Press Enter to continue Network Configuration of Full-Feature Workstation Configuring Full-Feature Workstation with a Router Network Nnn.nnn.nnn.nnn portname Name=remoteportname gateway=1 name=localportname gateway=2Press Enter Otherwise, Press Enter Basic-Feature Workstation Software Generic X-TerminalInstalling MS-DOS Installing Microsoft Windows Installing NMW SoftwareReturn to the root directory. To do this, Type cd \ Password Installing the Analysis Gateway Option 5000 Systems OnlyInstallation Type root Press EnterSystem prompts for the value of the starting I/O address Type 2B0 Type D2000 Press EnterConfiguration Do you want the kernel to boot by default? y/n Type yAnalysis Selection Menu Adding a 6510 to the 6800 Series NMS How many local terminals 1 Ð 6 are configured on this 6510?Enter Analysis 6510 name, 15 characters max To exit the configuration process, Type Do you wish to see a system summary? y or n Changing 6510 ParametersSystem Name CC Name Port # Select port number from list 1,2,3,4,5,6,7,8 Enter Analysis 6510 name, 15 characters max ªsystem nameºParameters successfully changed Removing a 6510 Configuration Elapsed Time Setting Data RatesªSystem nameº removed from the system System Start-Up and Shutdown UIP Start-Up and ShutdownStarting the NMS Application Program Starting Unix on the HostType nms Press Enter Type ffw Press Enter FFW Login Window Type admin Press EnterShutting Down the NMS Application Program Manager WindowThey will be shut down? y/n n Are you sure you want to shut down UNIX? y/n Shutting Down Unix on the HostLog off now or risk your files being damaged Starting Unix on the UIP Starting the UIP Application ProgramShutting Down the UIP Application Program To select Return to Console LoginPress Return to continue Press Enter Shutting Down Unix on the UIP Unix will now be shutdown? y/nPerforming Migration Introduction To Migrating Databases Release 1 Database Migration Databases MigratedDevice Address Cleaning Up the DatabaseDevice Name Circuit Name Device ModelSerial Number Site NameSite Contact Phone Backing Up the Database Select All of the Above Databases. To do this, TypeMigrating the Database Do you wish to initialize the Online partition? y/n n Do you wish to initialize the NMS database y/n nEnter the previous NMS type sc, r1, r2, r3, r3.1, r4, r4.1 Original Menu Showing Selected Type r1Xxxx Data Base Initialization Xxxx Data Base Initialization CompletedTo select Start the System Now rebuild the NMS database indicesStarting the AT&T Paradyne NMS system. Please wait Checking the Migrated Database Data Integrity VerificationProfile Data Changes and Corrections Cd /usr/tmp pg migrate.err pg migrate.outPerforming Migration Release 2 Database Migration Cleaning Up the Database Continue with backup? y/n y Database Backup for Migration CompletedMigrating the Database Enter the appropriate type, Type r2 Do you wish to migrate faults data y or n? n Original Menu Showing Selected Type r2Do you wish to migrate results queue y or n? n Do you wish to migrate trouble ticket data y or n? nType c Press Enter Press nms Press Enter Checking the Migrated Database Cd /usr/tmp Pg migdbload.log pg migrestore.log Release 3.0/3.1 Database MigrationTo migrate the NMS database, perform the following steps Do you wish to initialize the Online partition? y/n n Type Original Menu Showing Selected Type r3 Do you have another level of tapes to restore? y/n Press Return to continue Press ReturnType nms Press Enter Checking the Migrated Database Cd /usr/tmp pg initdb.log pg restorelog Release 4.0/4.1 Database MigrationCleaning Up the Database Do you wish to initialize the Online partition? y/n n Do you wish to initialize the NMS database? y/n n Original Menu Showing Selected Type R4 Type n Press Enter Release 4.2 6800 NMS Main Menu appears. To continue Checking the Migrated Database Cd /usr/tmp pg initdb.log pg restorelog Running Diagnostics SDX Diagnostic Program Boot MenuSDX Main Menu Do you wish to review summary again y/n Type yStarLAN 10 NAU Diagnostic Program StarLAN IRQ StrappingInsert new diskette for Drive a and strike enter when ready IPC-900 Diagnostic Program for Altos 5000 Systems OnlyFormat complete, format another? After each line. When complete, Press F6 Press Enter Port-to-Port Connections IPC-1600 Diagnostic Program Dip Switch Settings for Memory AddressType n Press Enter After each line. When complete, Press F6 Type DCPDIAG2 Emulex DCP/MUXi Diagnostic Program Select Start Address and Press Enter Type any key to proceed. Press Enter3810, 3811, and 3820 Modems Configuring 3810, 3811, and 3820 ModemsCEO Modem Hardware Option Settings for the 2224-CEO LCD prompts Save Straps? Yes Ð NoSoftware Configuration Option Parameters for the 2224-CEO O34 Locking Option ChangesO12 O51Feature# Adapter and Cable Identification BFeature # Workstations For remote Bytex Switch ConnectsSystem Printer For remote Analysis RemoteExternal Systems Remote DCX Multiplexers For localAnalysis For local Integrator/StarkeeperIBM NetView/PC Connects Workstations ConnectsVT100 Emulation Connects 6821-F1-513 M6BC/M4BB System Controller Local StarKeeper LocalDataphone II Connects NetView/PC Connects74x Multiplexers Connects DCX Multiplexers Connects Analysis ConnectsGeneral Troubleshooting Procedures Maintaining Multiplexers CMultiplexer Problems Command Port FailurePollpf Multiplexer polling port is down Monitor Power Distribution Connection Figure C-3. Power Connections for 745 Multiplexers Figure C-4 Power Supply for 740 Multiplexers Figure C-5 Power Supply Connection for 745 Multiplexers NAP Speed Event Port Failure Faulty ConnectionsSoftware Configuration Errors Evtpf Multiplexer event port is downNMS Commands Event Log Printer Problems External Systems Port Failure