Paradyne 6800 manual Migrating the Database, Type root Press Enter

COMSPHERE 6800 Series Network Management System

5.Insert a quarter-inch data cartridge into the tape drive, then TYPE: y

PRESS: Enter

to begin the copying process. Messages are displayed as databases are copied from the hard disk to the cartridge tape.

6.Write-protect the tape.

Migrating the Database

Following physical transfer, data is translated to the values and internal representations which are consistent with the Release 4.2 database schema. The translated data is then used to populate the following Release 4.2 databases:

•Device Profile

•Site Profile

•Facility Profile

•Historical Alerts

In addition to INFORMIX data, files created by the Release 1 multiplexer application are migrated without translation for use in Release 4.2. This multiplexer data does not correspond to any INFORMIX tables. To migrate the existing Release 1 database to the Release 4.2 NMS, perform the following steps:

NOTE

The NMS application must not be running.

1.At the Console Login: prompt,

TYPE: root

PRESS: Enter

2.From the pound sign (#) prompt, TYPE: ksh /usr/nms/adm/installDb PRESS: Enter

The AT&T Paradyne NMS Parameters menu (Figure 7-1) appears:

7-8 January 1997 6800-A2-GN22-30