Paradyne 6800 manual Installing Microsoft Windows, Installing NMW Software

COMSPHERE 6800 Series Network Management System

Installing Microsoft Windows

Microsoft Windows provides a window-based interface for the NMW software. You cannot run the NMW software unless Windows is first installed. A copy of Windows Version 3.0 is provided with the NMW.

The following steps explain how to install Microsoft Windows on the hard disk of a basic-feature workstation. Be sure you have installed MS-DOS before attempting to install Windows.

1.Turn the computer's power on.

2.At the C> prompt: TYPE: a: PRESS: Enter

to make Drive A the active drive.

3.Insert Disk 1 in Drive A and TYPE: setup

PRESS: Enter

to run the setup program.

4.Follow the instructions on the screen to install windows. Do not change the computer or mouse type. Use the default hardware configuration selected by the installation program.

Installing NMW Software

The NMW software package is the application program that enables your Altos or AT&T workstation to operate as a basic-feature workstation. The following steps explain how to install NMW. Be sure you have installed MS-DOS and Windows software before you attempt to install NMW.

NOTE

Installing the NMW software requires a knowledge of certain basic MS-DOS concepts such as path and AUTOEXEC.BAT file. If you are not familiar with these concepts, read the relevant sections in the MS-DOS User's Guide before attempting to install NMW.

1.Turn the computer's power on.

2.At the C> prompt, TYPE: md \nmw PRESS: Enter

to create a directory named NMW.

5-88 January 1997 6800-A2-GN22-30