Paradyne 6800 manual System 15000 Ð Removing the Top Cover

COMSPHERE 6800 Series Network Management System

494-14500-01

Figure 2-15. System 15000 Ð Removing the Top Cover

2.Slide the right-hand side cover upwards about 1I and swing the cover outwards pivoting on the rear edge, as shown in Figure 2-16.

3.Disengage the rear edge of the right side cover and lift it from the chassis and set it aside.

4.Remove the left side cover by lifting it by the fingerhold built into the top portion of the cover and set the cover aside.

5.Open the door on left front of the chassis and remove the two Phillips-head screws just inside the hinge (see Figure 2-17). Save the screws for later.

6.Disengage the door spring from the pin on the lower pivot of the door hinge.

7.Remove the left side cover by lifting it by the fingerhold built into the top portion of the cover and set the cover aside.

2-32 January 1997 6800-A2-GN22-30