Paradyne 6800 manual Installing the Second and Third Hard Disks in the System

COMSPHERE 6800 Series Network Management System

Installing the Second and Third Hard Disks in the System 15000

To physically install the second and third hard disks in the System 15000 chassis, refer to

Figure 2-20 and perform the following steps for each disk:

1.Attach the 3.5I mounting brackets to the side of the disk.

2.Slide the drive into the chassis and attach the SCSI bus ribbon cable using the next connector available on the cable to the 50-pin connector on the drive.

3.Attach the power connector to the 4-pin connector on the drive.

4.Push the drive into the chassis until it is fully seated and the mounting brackets lock in the chassis.

3rd Hard

Drive

2nd Hard

Drive

1st Hard

Drive

494-14509-01

Figure 2-20. Altos 15000 Showing the Hard Disk Bay

2-38 January 1997 6800-A2-GN22-30