How to Install
1.To install the speaker in the rear tray, first determine the appropriate area in which to place it. The speakers must be installed in a place where there are spaces of at least 32 mm over the tray and at least 49 mm under the tray. ln determining the location, make sure that the bottom part of each speaker fits into the large hole in the steel plate on which the rear tray is fixed.
2.Remove the rear tray.
3.The paper pattern printed on the bottom of the packing box shows the exact shape of the area on the rear tray through which the speaker will be installed. Apply the paper pattern onto the area determined in 1. above, and trace out the shape of the area on the tray.
4.Then, cut out the marked area.
5.The next step is to wire the speakers. Be sure to connect to connect corresponding terminals, i.e. "left" to "left",
6.Use the tapping screw and speed nuts provided to fix the speaker and grille to the rear tray. Match the 4 screw holes in the speaker frame and the grille to the holes in the rear tray, insert the 4 screws
in into the holes and secure them with 4 nut.
7.The process for installing the speakers in the door is much the same as for installing the speakers in the rear tray. ln this case, however, extra care must be taken to install the speaker out of the way of the door handle. lnstall the speakers with the terminals down.
Tweeter level adjust
2- |
|
WAY CRO |
|
SSOVER NE | TWORK |
12dB/Oct. |
INPUT |
| |
WOOFER | TWEETER | |
| ||
|
| 0dB |
Woofer Mounting
1 x4
0dB
10
6 x4
Tweeter Mounting
Swivel Mounting | Flush Mounting |
12
Network Mounting
| |
CROS |
|
SOVER NET | WORK |
12dB/Oct. |
INPUT |
|
W |
|
OOFER | TWEETER |
|
Angle MountingSurface Mounting
14 | 14 |
3 | x2 | 3 | x2 |
13 |
|
|
|
4 |
|
| 4 |
|
|
|
5
2 | x2 | 5 | 6 | x2 |
6x2
2- |
|
WAY C |
|
ROSS |
|
12dBOVER N | ETWORK |
/Oct. |
INPUT |
|
W |
|
OOFER | TWEETER |
|
11
Connection
7 11
Amplifier
Black lined
8
12dB/Oct.
INPUT WOOFER TWEETER
|
|
| 6 | x2 |
|
|
Parts |
|
|
|
|
|
|
1 Screw | 2 Screw | 3 Screw | 4 Screw |
| 5 Screw nut | 6 Speed nut |
x8 | x4 | x4 |
| x2 | x4 | x16 |
(O4x25mm) | (O4x20mm) | (O3.5x20mm) | (O4x25mm) | (O4mm) | (O4 mm) | |
7 Network cord |
| 8 Speaker cord |
|
| 9 Speaker cord |
|
| x2 |
|
| x2 |
| x2 |
| 4m |
| 2m |
|
| 2m |
Woofer
Black lined
10 Grille Ass'y | 11 Network |
| 12 Mounting bracket | 13 Angle adaptor | 14 Fix frame | ||
| CROSSOVER |
|
|
|
| ||
|
| N |
|
|
| ||
|
| 12 | dB/Oct. | ETWORK |
|
| |
|
|
|
| x2 | x2 | ||
| IN |
|
|
| x2 | ||
|
|
|
|
|
|
| |
9 |
|
|
|
| x2 |
|
|
Tweeter
