Paradyne 6800 manual Nnn.nnn.nnn.nnn ffw-name

Loading and Restoring Software

Add the IP addresses and names of all workstations that the host will be directly communicating with in the format:

nnn.nnn.nnn.nnn ffw-name

Where: nnn is a number from 1 to 255 inclusive and

ffw-nameis the name of the full feature workstation processor.

NOTE

For the 15000 platform, the division of full-feature workstations among the three processors should be:

Host Uip-1 Uip-2

7 3 14

Configurations with lower numbers of full-feature workstations should retain equivalent ratios among the processors for best performance.

Save your changes, then exit vi.

TYPE: vi $HOME/.rhosts

PRESS: Enter

Add the names of all workstations connected to the host processor, one name to a line. Save these changes and exit vi.

NOTE

If a full-feature workstation is to communicate with the UIP, do not put that workstation's IP address and processor name in the host's /etc/hosts or .rhosts files.

3.To change the IP address of a host already configured at the factory: TYPE: netconfig

PRESS: Enter

6800-A2-GN22-30 January 1997 5-31