Paradyne 6800 manual Xxxx Data Base Initialization Completed

Performing Migration

12.To continue, TYPE: y PRESS: Enter

13.To continue, TYPE: c PRESS: Enter

The following message appears:

xxxx Data Base Initialization xxxx

followed by several console messages indicating the initialization of the INFORMIX OnLine. Once completed, the following message appears:

xxxx Data Base Initialization Completed xxxx

followed by several console messages indicating the start-up of database servers.

Once completed, the following message appears:

Beginning Migration Procedures

Device data will be migrated from the previous NMS

Do you also wish to migrate fault data (y or n)? [y].

14.To transfer historical fault data or to skip fault transfer, TYPE: y or n

PRESS: Enter

The following message appears:

Enter the previous NMS type (sc300, sc400, 6820r1, 6830r1, restore):

15.Enter the previous NMS type, TYPE: 6820r1 or 6830r1 PRESS: Enter

The following message appears:

Insert the migration cartridge tape containing the Backup data you downloaded before upgrading your NMS. Please enter ``ready'' when done:

16.Insert the backup cartridge tape into the Release 4.2 6800 NMS host computer. Then, TYPE: ready

PRESS: Enter

The following message appears:

Data Upload Completed Successfully

You may now remove the cartridge tape. Save it for a backup. Please enter ``ready'' when done:

6800-A2-GN22-30 January 1997 7-11