Paradyne 6800 manual Do you wish to have the screen-saver capability y/n n, Type cd Press Enter

Loading and Restoring Software

The system prompts for confirmation.

TYPE: y

PRESS: Enter

NOTE

If you plan to use the default network configuration on an Altos 5000 System, you must enter uip-1as the uip name.

A series of additional messages appears indicating that the kernel files are being updated, the configuration file created, and the full-feature workstation installed.

The following message appears:

Do you wish to have the screen-saver capability (y/n) [n]

TYPE: y (for an automatic time-out of the CRT)

PRESS: Enter

or

TYPE: n (for a continuous display)

PRESS: Enter

The installation program displays a message indicating that the post-installation phase of the installation is complete.

14.At this point, the operating system is rebuilt. When this is complete, you will be asked whether you want the kernel to boot by default. To indicate yes,

TYPE: y

PRESS: Enter

A second prompt appears, asking whether you want the kernel environment rebuilt. TYPE: y

PRESS: Enter

A message appears indicating the installation is complete. If you installed the 5000 System, proceed to Step a. If you installed the 15000 System, proceed to Step b.

a.For the 5000 system, you must shutdown and reboot the system to activate the kernel. To do this, remove the floppy disk and cartridge tape, and

TYPE: cd /

PRESS: Enter

TYPE: shutdown -g0 -y -i6

PRESS: Enter

The system will reboot.

6800-A2-GN22-30 January 1997 5-25