Paradyne 6800 manual Type y Press Enter

COMSPHERE 6800 Series Network Management System

Installing GrafPoint X-One Software Package with a StarLAN 10 NAU

To install the GrafPoint X-One Server when a StarLAN NAU card will be used, perform the following steps:

1.Insert the GrafPoint X-One Installation disk into the drive and TYPE: A:install

PRESS: Enter

2.The system prompts:

Enter the floppy drive to use [A:]: PRESS: Enter

3.The system prompts:

Enter the destination drive to use [C:]: PRESS: Enter

4.The system prompts:

Enter the destination directory to use [\/XONE]: PRESS: Enter

If the directory, \XONE, does not exist, the system prompts:

The directory C:\XONE does not exist. OK to create it? (y/n) [y] PRESS: Enter

5.The system asks a series of questions to which you should reply as follows:

Do you wish to install the fonts (y/n)? [n]: TYPE: y

PRESS: Enter

The system prompts:

Do you wish to install the standard set of fonts, including `MISC' and `75DPI' (y/n): [y]

PRESS: Enter

Do you wish to install the 100DPI fonts (y/n)? [n] TYPE: y

PRESS: Enter

Do you wish to install the OpenWindows fonts: (y/n)? [n]

TYPE: y

PRESS: Enter

5-70 January 1997 6800-A2-GN22-30