Paradyne 6800 manual Insert the proper disk and Press Enter System responds

Loading and Restoring Software

16.The system responds:

Settings saved the file ªC:\/XONE\/hardware.cfgº. Press any key to continue

PRESS: Enter

17.The system prompts:

Xsetup will need to copy the graphics driver `vga256.dvr' from the X-One diskette to the C:\/XONE directory.

Insert the disk labeled `Install' in drive A: Press ENTER to continue or `q' to Quit

18.Insert the proper disk and PRESS: Enter

19.The system responds:

1file extracted from archive Press any key to continue PRESS: Enter

20.The system prompts:

Select Network configuration

1.Grafpoint's own builtin TCP/IP

2.Beame and Whiteside BW-TCP

3.FTP Software's PC/TCP version 2.05

4.FTP Software's PC/TCP version 2.1 or later

5.Sun Microsystem's PC/NFS ver's 3.5-3.9

6.Sun Microsystem's PC/NFS ver. 4.0 or later

7.Woolongong's Pathway TCP

Enter Selection or `q' to Quit [1]:

PRESS: Enter

21.The system then prompts:

Select Network Interface

.

.

.

4. 3COM 3C503 (Etherlink II)

Enter selection or `q' to Quit:

TYPE: 4

PRESS: Enter

6800-A2-GN22-30 January 1997 5-65