Paradyne 6800 manual Want to QUIT?

COMSPHERE 6800 Series Network Management System

The Customer Test main menu appears.

11.Use the ↓ key to highlight Disk Utilities. PRESS: Enter

The Disk Utility Menu appears.

A table is displayed indicating the physical characteristics of the disk. The disk utility program is automatically run measuring the characteristics of the disk drive. As each option is measured it turns from blue to yellow.

12.Use the ↓ key to highlight Low Level Format. PRESS: Enter

The Low Level Format option may be hidden. If it is shown, use the ↓ key to highlight it and

PRESS: Enter

If it is not shown,

PRESS: Ctrl + Alt + f

to redraw the menu with the Low Level Format option, and then use the ↓ key to select it.

The Low-Level Format screen appears and displays the following message:

!!!WARNING!!! DESTRUCTIVE HARD DISK Tests specified: Data will be DESTROYED

on HARD DISK #1. Press <Alt-F5> to continue. Press [ESC] to abort.

13.To prepare the hard disk for full-feature workstation use, PRESS: Alt + F5

NOTE

The cylinder fields should be incrementing at one cylinder per second. The entire format operation should take about 20 minutes.

14.When the formatting is complete, PRESS: Esc

to return to the original Customer Test main menu.

15.Use the ↓ key to highlight Exit The Program. A window displays the message:

Want to QUIT?

Remove the Customer Test disk and select Yes.

2-56 January 1997 6800-A2-GN22-30