Paradyne 6800 manual Select top level of chain to Add or q to quit, Add chain altostcp aaa y/n

Loading and Restoring Software

Available options:

1.Add a chain

2.Remove a chain

3.Reconfigure an element in a chain q. Quit

Select option:

TYPE: 1

PRESS: Enter

The system displays the top-level chain descriptions and prompt:

Select top level of chain to Add or q to quit:

TYPE: 1 (for altos\Mtcp)

PRESS: Enter

The system prompts:

Select next level of chain to Add or q to quit:

TYPE: n

PRESS: Enter

Where: n is 5 on Altos 5000 platform 6 on Altos 15000 platform

The system prompts for confirmation:

Add chain altos_tcp -> aaa (y/n):

TYPE: y

PRESS: Enter

Where: aaa is en0 on Altos 5000 platform enc00 on Altos 15000 platform

The following messages appear:

Adding altos_tcp -> aaa

Enable aaa driver

If you are installing an Altos 5000 host, go to Step 19. Otherwise, the following messages appear:

ALTOS ETHERNET CHANNEL ADAPTER SETUP

This utility is used to setup the ECA board device driver. You may install or display the driver configuration. To install the ECA driver or change the driver configuration, there are several parameters that you must supply. These are listed as follows:

a. The number of ECA boards installed in the system

b. The EISA slot number of each ECA board

c. The Interrupt Number (IRQ), shared among all ECA boards

6800-A2-GN22-30 January 1997 5-13