Paradyne 6800 manual Connecting the Components

Connecting the Components

To establish the file export connection, perform the following steps at the host processor end:

1.Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is configured for file export.

2.Connect the other end of the 035-0153-0031 cable to the 002-0039-031 connector.

3.Connect the 002-0039-0031 connector to the local DCE device.

To establish the UAI connection, perform the following steps at the host processor end:

1.Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is configured for the UAI.

2.Connect the other end of the 035-0153-0031 cable to the 002-0039-031 connector.

3.Connect the 002-0039-0031 connector to the local DCE device.

To establish the ACCUMASTER cut-through connection, perform the following steps at the host processor end.

1.Connect the grounded end of the 035-0153-0031 cable to the IPC-1600 port that is configured for remote terminal.

2.Connect the other end of the 035-0153-0031 cable to the 002-0039-031 connector.

3.Connect the 002-0039-0031 connector to the local DCE device.

Perform the following steps to connect the three remote DCE devices to the ACCUMASTER Integrator.

1.Connect one end of the 835-5783-0011 cable to the appropriate port of the ACCUMASTER Integrator.

2.Connect the 835-5783-0011 cable to the remote DCE device.

6800-A2-GN22-30 January 1997 4-49