FCC STATEMENT
Your telephone complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone compa- ny. These numbers are on the bottom of your phone.
Note: You must not connect your tele- phone to:
•
•
•most electronic key phone systems
SETUP
Plug the handset cord into the jacks on the handset and on the base’s side.
If you want to place the phone on a desk, plug one end of the supplied long telephone cord into the jack on the bot- tom of the base. Press the cord into the channel provided to keep it out of the way. Plug the cord’s other end into a modular phone jack.
If you prefer a wall phone to a desk phone, you can mount the phone on a wall plate or directly on a wall.
Wall Mount with Wall Plate
1.To mount the phone on a wall plate, plug one end of the supplied short telephone cord into the jack on the bottom of the base.
2
2.Plug the cord’s other end into the modular jack in the wall plate.
3.Fit the
4.Before you hang up the phone’s handset, slide up the handset holder to remove it, turn it over so its tabbed edge faces up, then slide it back down into its slot.
Wall Mount without Wall Plate
1.To mount the phone directly on a wall, drill two holes 315/16 inches apart as shown, then thread a screw (not supplied) through each hole, letting the head extend about 1/8 inch from the wall.
Note: Be sure to use screws with heads that fit into the keyhole slots on the bottom of the phone.
