Samsung HT-BD8200 user manual Movie Frame 24 Fs, Resolution, Screen may blink for a few seconds

Movie Frame (24 Fs)

Movies are usually filmed at 24 frames per second. Some			System
Blu-ray Discs have the capability of playing back at this frame		Music
		Photo
			Language
rate. Setting the Movie Frame (24Fs) feature to ON allows you			Audio		TV Aspect	: 16:9 Normal
	DVDSetup Display			◄ Movie Frame (24 Fs) : Off On				►
to adjust the Blu-ray Home Theater's HDMI output to 24			HDMI				Off
frames per second for improved picture quality.			Network		Resolution	:	1080p
					Progressive Mode	: Auto
			Parental
					Still Mode	: Auto
You can enjoy the Movie Frame (24Fs) feature only on a TV					Screen Message	: On
					Light Effect	: In Standby

supporting this frame rate.

This menu can only be selected in 1080i or 1080p HDMI output resolution modes.

Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video material (30 frame). When the setting switches between Movie (24 frame) and Video (30 frame),

the screen may blink for a few seconds.

Resolution

ENG

● DISPLAY SETUP

Sets the output resolution of the HDMI and Composite video signal.

•The number in 480i, 480p, 720p, 1080p and 1080i indicates the number of lines of video. The i and p indicate interlace and progressive scan, respectively.

-BD Wise : Automatically sets the optimal resolution when connected via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On.)

-1080p : Outputs 1080 lines of progressive video (HDMI only).

-1080i : Outputs 1080 lines of interlaced video (HDMI only).

-720p : Outputs 720 lines of progressive video (HDMI only).

-480p : Outputs 480 lines of progressive video (HDMI only).

-480i : Outputs 480 lines of interlaced video (Composite only).

If the connected TV does not support Movie Frame or the selected resolution, you will see the following message:

If you select Yes and the resolution is not supported, the TV's screen will be blank. Please wait for 15 seconds and

the resolution will revert to the previous value automatically.

	Music	System
		Language	TV Aspect	: 16:9 Normal
	Photo
		Audio	Movie Frame (24 Fs) : Off
DVD	Setup	Display	◄ Resolution	: 1080p1080p
		HDMI
					1080i
			Progressive Mode : Auto
		Network			720p
			Still Mode	:	Auto
		Parental	Screen Message	:	On 480p
					480i
			Light Effect	:	In Standby

	Music	System
		Language	TV Aspect	: 16:9 Normal
	Photo
		Audio	Movie Frame (24 Fs) : Off
	Setup	If no pictures are shown after the selection,
DVD		Displayplease wait for 15Resolseconutionds. And then,		: 1080p	►
			◄
		the resolution will be reverted		: Auto
		HDMI	Progressive Mode
		to the previous value automatically.
		Network	Still Mode	: Auto
		Would you like to make a selection?		: On
		Parental	Screen Message
		Yes	Light Effect	: In Standby
			No

M If the screen is blank, press and hold the STOP () button on the front of the player for more than 5 seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.

When the factory default settings are restored, all the user data stored in the BD data will be deleted.

41