
Dayton Operating Instructions and Parts Manual
Model 4E769B
General Safety Information
(Continued)
•The electrical connections and grounding of the heater shall follow the National Electric Code, ANSI/ NFPA 70.
•Use only the electrical voltage and frequency specified on model plate.
•Electrical grounding instructions — This appliance is equipped with a
•Use only a
Specifications
ELECTRICAL SPECIFICATIONS
Electrical |
|
|
|
|
|
|
Input |
| Amperage |
|
|
|
|
120 Volt/60Hertz | 2 |
|
|
|
| |
GENERAL SPECIFICATIONS |
|
|
| |||
Output |
|
| Fuel | Size | Regulator | Weight |
Rating BTU/Hr | Fuel |
| Consumption | L x W x H (Inches) | Outlet Pressure | (pounds) |
35,000 | Only Propane Vapor .38 Gallons/Hour | 18.5 x 7.7 x 12.8 | 11" WC | 14.5 (Heater) | ||
|
|
| 1.6 Pounds/Hour |
|
| 16 (Shipping) |
GENERAL SPECIFICATIONS (Cont.)
Manifold | Hot Air Output |
| Supply Pressure | Temperature Range |
|
Pressure | (CFM Approx) | Ignition | To Regulator | For Operating Heater | Motor |
10.8" WC | 175 | Manual | 10 psi Minimum (for) | 2735 RPM | |
|
| Piezo | purposes of input |
|
|
adjustment) Tank Pressure or 200 psi Maximum
(*)When running heater in temperatures above 85° F, high internal temperatures may cause thermal limit device to shut down heater.Minimum ambient operating temperature:
®
3
Version B - For Reduction | G016.J |