Operating Instructions & Parts Manual | 4E769B |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Dayton® Propane
Construction Heater
Description
Dayton Model 4E769B heater is a 35,000 BTU/Hr construction heater. This heater uses propane gas for combustion and electricity to run the motor. It is primarily intended for temporary heating of buildings under construction, alteration, or repair. This heater should only be used indoors but never in occupied dwellings.
Fire, burn, inhala-
tion, and explosion haz- ard. Keep solid combus- tibles such as building
Unpacking
1.Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connec- tor and hose/regulator assembly) for storage.
2.Remove all items from carton.
3.Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.
Figure 1 – Model 4E769B
GENERAL HAZARD WARNING
Failure to comply with the precautions and in- structions provided with this heater can result in death, serious bodily injury, and property loss or damage from hazards of fire, explosion, burn, asphyxiation, carbon monoxide poisoning, and/ or electrical shock.
Only persons who can understand and follow instructions should use or service this heater.
If you need assistance or heater information such as an instructions manual, labels, etc. con- tact the manufacturer.
materials, paper or card- board, a safe distance away from the heater as recommended by the instructions. Never use the heater in spaces which do or may contain volatile or airborne com- bustibles, or products such as gasoline, sol- vents, paint thinner, dust particles, or unknown chemicals.
Not for home or
recreational vehicle use.
Heater is designed and approved for use as a construction heater under ANSI Z83.7. The primary purpose of construc- tion heaters is to provide temporary heating of buildings under construction, alteration or repair, and to provide temporary emergency heat. Properly used, the heater provides safe economi- cal heating. Products of combustion are vented into the area being heated.
We cannot foresee every use which may be made of our heaters. Check with your local fire safety authority if you have questions about heater use.
Other standards govern the use of fuel gases and heat producing products for specific uses. Local authorities can advise you about these.
Form 5S3439
Printed in U.S.A. 03430 1199/511/VCPVP
®
Version B - For Reduction | G016.J |
