Dell W04C, 9010 owner manual Installing the Optical Drive, Removing the Hard Drive

Installing the Optical Drive

1.Place the optical-drive bracket on the optical drive.

2.Tighten the screws that secure the optical-drive bracket to the optical drive.

3.Align and slide the optical drive into its slot.

4.Connect the optical-drive cable.

5.Tighten the screws that secure the optical drive to the computer.

6.Install the:

a)VESA mount bracket

b)back cover

c)VESA stand

7.Follow the procedures in After Working Inside Your Computer.

Removing the Hard Drive

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)VESA stand

b)back cover

c)VESA mount bracket

3.Unthread the cables from the notches on the hard-drive bracket. Disconnect the hard-drive cables from the hard drive.

4.Remove the screw that secures the hard-drive bracket to the system board. Slide and lift the hard-drive bracket away from the computer.

5.For a 2.5–inch hard drive, remove the screws that secure the hard drive to the hard-drive bracket. Slide the hard drive from the hard-drive bracket. Remove the screws that secure the hard-drive case to the hard drive.

20