Dell 9010, W04C owner manual Installing the Hard Drive, Removing the Intrusion Switch

6.For a 3.5–inch hard drive, remove the screws that secure the hard drive to the hard-drive bracket. Slide the hard drive from the hard-drive bracket.

Installing the Hard Drive

1.For a 3.5–inch hard drive, slide the hard drive into the hard-drive bracket. Tighten the screws that secure the hard drive to the hard-drive bracket.

2.For a 2.5–inch hard drive, tighten the screws that secure the hard-drive case to the hard drive. Slide the hard drive into the hard-drive bracket. Tighten the screws that secure the hard drive to the hard-drive bracket.

3.Align and place the hard-drive bracket on the computer. Tighten the screw that secures the hard-drive bracket to the system board.

4.Connect the hard drive cables to the hard drive. Thread the cables into the notches on the hard-drive bracket.

5.Install:

a)VESA mount bracket

b)back cover

c)VESA stand

6.Follow the procedures in After Working Inside Your Computer.

Removing the Intrusion Switch

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)VESA stand

b)back cover

c)VESA mount bracket

d)system-board shield

21