Installing the Speakers
1.Place and align the speakers on the computer. Tighten the screws to secure the speaker to the chassis.
2.Thread the cables on the notches. Connect the right and left speaker cables to the connector on the system board.
3.Install:
a)
b)VESA mount bracket
c)back cover
d)VESA stand
4.Follow the procedures in After Working Inside Your Computer.
Removing the System Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)VESA stand
b)back cover
c)VESA mount bracket
d)
e)memory
f)optical drive
g)hard drive
h)
i)power supply unit
j)input/output board shield
k)converter board
l)
3.Disconnect any cables connected to the system board.
4.Remove the screws that secure the system board to the computer.
33