Manuals / Dell / Computer Equipment / Laptop

Dell 9010, W04C owner manual Updating the BIOS

Models: 9010 W04C

1 79

Download 79 pages 6.18 Kb

Page 63

Updating the BIOS

Option	Description

Client SubnetMask	Displays the subnet mask of the client. The default setting is 255.255.255.255.
	NOTE: This field is only relevant when the Integrated NIC control in the System
	Configuration group is set to Enabled with ImageServer and when Client DHCP is
	set to Static IP.
Client Gateway	Displays the gateway IP address for the client. The default setting is 255.255.255.255.
	NOTE: This field is only relevant when the Integrated NIC control in the System
	Configuration group is set to Enabled with ImageServer and when Client DHCP is
	set to Static IP.
License Status	Displays the current license status.
Table 24. System Logs

Option	Description

BIOS events	Displays the system event log and allows you to clear the log.
	• Clear Log

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For laptops, ensure that your computer battery is fully charged and connected to a power outlet

1.Re-start the computer.

2.Go to dell.com/support.

3.Enter the Service Tag or Express Service Code and click Submit.

NOTE: To locate the Service Tag, click Where is my Service Tag?

NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the instructions on screen.

4.If you are unable to locate or find the Service Tag, click the Product Category of your computer.

5.Choose the Product Type from the list.

6.Select your computer model and the Product Support page of your computer appears.

7.Click Get drivers and click View All Drivers. The Drivers and Downloads page opens.

8.On the Drivers and Downloads screen, under the Operating System drop-down list, select BIOS.

9.Identify the latest BIOS file and click Download File.

You can also analyze which drivers need an update. To do this for your product, click Analyze System for Updates and follow the instructions on the screen.

10.Select your preferred download method in the Please select your download method below window; click Download File.

The File Download window appears.

11.Click Save to save the file on your computer.

12.Click Run to install the updated BIOS settings on your computer. Follow the instructions on the screen.

63

Image 63

Dell 9010, W04C owner manual Updating the BIOS

Contents

Regulatory Model W04C Regulatory Type W04C001 Dell OptiPlex 9010 All-In-One Touch Owners Manual2013 Dell Inc. All Rights Reserved Notes, Cautions, and WarningsContents 2 Removing and Installing Components1 Working on Your Computer 5 Troubleshooting Your Computer Installing the Input/Output Board Shield3 System Setup 4 DiagnosticsContacting Dell Technical SpecificationsPage Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerNOTE Avoid using the touchscreen in dusty, hot, or humid environments Important InformationPage Removing the Video Electronics Standards Association VESA Stand Removing and Installing Components1. Follow the procedures in Before Working Inside Your Computer Recommended Tools1. Follow the procedures in Before Working Inside Your Computer Installing the VESA Stand4. Follow the procedures in After Working Inside Your Computer Removing the Back Cover1. Follow the procedures in Before Working Inside Your Computer Installing the Back CoverRemoving the Memory 4. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer Installing the Memory5. Follow the procedures in After Working Inside Your Computer Removing the VESA Mount Bracket1. Follow the procedures in Before Working Inside Your Computer Installing the VESA Mount BracketRemoving the Touchscreen Board 4. Follow the procedures in After Working Inside Your ComputerRemoving the Converter Board Installing the Touchscreen BoardInstalling the Converter Board 6. Follow the procedures in After Working Inside Your Computer5. Follow the procedures in After Working Inside Your Computer Installing the System-Board ShieldRemoving the Coin-Cell Battery Removing the System-Board Shield1. Follow the procedures in Before Working Inside Your Computer Installing the Coin-Cell BatteryRemoving the Optical Drive 4. Follow the procedures in After Working Inside Your Computer5. Lift the optical drive from the computer 1. Follow the procedures in Before Working Inside Your Computer Installing the Optical Drive7. Follow the procedures in After Working Inside Your Computer Removing the Hard Drive1. Follow the procedures in Before Working Inside Your Computer Installing the Hard DriveRemoving the Intrusion Switch 6. Follow the procedures in After Working Inside Your ComputerInstalling the Intrusion Switch 4. Follow the procedures in After Working Inside Your Computer Removing the Wireless Local Area Network WLAN CardInstalling the WLAN Card Removing the Power-Supply Fan5. Follow the procedures in After Working Inside Your Computer Installing the Power-Supply Fan1. Follow the procedures in Before Working Inside Your Computer Removing the Power Supply Unit PSU6. Follow the procedures in After Working Inside Your Computer Installing the Power Supply UnitRemoving the Heat-Sink Assembly Installing the Heat-Sink AssemblyRemoving the Input/Output Board Shield 4. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer 6. Flip the input/output board shield and remove it from the computer 7. Disconnect the power-connector cable1. Follow the procedures in Before Working Inside Your Computer Installing the Input/Output Board ShieldRemoving the Power-Button Board 7. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer Installing the Power-Button BoardRemoving the Processor Fan 4. Follow the procedures in After Working Inside Your Computer4. Follow the procedures in After Working Inside Your Computer Installing the Processor FanInstalling the Processor Removing the Processord system-board shield Removing the Speakers1. Follow the procedures in Before Working Inside Your Computer 2. Remove the a VESA stand b back cover c VESA mount bracket1. Follow the procedures in Before Working Inside Your Computer Installing the SpeakersRemoving the System Board 4. Follow the procedures in After Working Inside Your ComputerSystem Board Layout 5. Lift and remove the system board from the chassisThe following image displays the system board layout of the computer Installing the System Board 4. Follow the procedures in After Working Inside Your Computer Jumper SettingsClearing the CMOS Password Disabling the Password1. Follow the procedures in Before Working Inside Your Computer 11. Follow the procedures in After Working Inside Your ComputerRemoving the Display Panel 1. Follow the procedures in Before Working Inside Your Computerl power-supply fan m power supply unit n heat-sink assembly 5. Peel off the tape that adheres the connectors to the display panelo processor fan p speakers q antenna module r system board 7. Lift and remove the display panel from the middle frame Page 1. Follow the procedures in Before Working Inside Your Computer Installing the Display Panel9. Follow the procedures in After Working Inside Your Computer Removing the Antenna Modules1. Follow the procedures in Before Working Inside Your Computer Installing the Antenna ModulesRemoving the Camera 4. Follow the procedures in After Working Inside Your ComputerInstalling the Camera j hard drive k optical drive l WLAN card m input/output board shield d heat-sink assembly e power supply unit f processor fang converter board h power-button board i intrusion switch 5. Follow the procedures in After Working Inside Your ComputerSystem Setup Boot SequenceNavigation Keys System Setup Options - BIOS Setup Boot List Option Table 4. Security Allows you to bypass the System Password and the internal HDD password prompts Enable CPU XD Support selected by default Table 6. Power Management LAN or WLAN - Allows the system to be powered on by special LAN or Table 9. Wireless Table 10. MaintenanceTable 11. Image Server Table 13. General System Setup Options For Windows 8 onlyDisplays the subnet mask of the client. The default setting is Table 12. System LogsOption This option lets you enable or disable various drives on board. By default the options Table 15. Security Strong Password Password ConfigurationOption Table 16. Secure Boot Table 18. Power ManagementTable 17. Performance Fan Control Override OptionDescriptionAuto On Time Deep Sleep ControlTable 21. Wireless Table 19. POST BehaviorTable 20. Virtualization Support Table 23. Image Server Table 22. MaintenanceUpdating the BIOS Assigning a System Password and Setup Password System and Setup PasswordDeleting or Changing an Existing System and/or Setup Password Page Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsPower Supply Built in Self-Test Page Troubleshooting Your Computer Diagnostic Power LED CodesImportant Information Error Messages Beep CodesHard-disk drive read No boot device available the F1 key to continue, F2 to run the setup utilityPage Technical Specifications Table 30. Cards Volume up/down buttons, program menus, and keyboard mediaTable 28. Audio Table 29. CommunicationsSpecification FeatureSpecification FeatureWhite light - Solid white light indicates power-on state blinking Table 37. Physical DimensionsNOTE The weight of your computer may vary depending on the configuration ordered and the manufacturing variabilityFeature SpecificationTable 39. Environmental Page 3. Click Contact Us on the left side of the page Contacting Dell4. Select the appropriate service or support link based on your need 1. Visit support.dell.com