Manuals / Dell / Computer Equipment / Laptop

Dell W04C OptionDescription, Auto On Time, Deep Sleep Control, Fan Control Override, Block Sleep

Models: 9010 W04C

1 79

Download 79 pages 6.18 Kb

Page 60

OptionDescription

OptionDescription

	•	Power On
	•	Last Power State
Auto On Time	This option sets the time of the day when you would like the system to turn on
	automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The
	startup time can be changed by typing the values in the time and A.M./P.M. fields.
	• Disabled — The system will not automatically power up.
	• Every Day — The system will power up every day at the time you specified
		above .
	• Weekdays — The system will power up Monday through Friday at the time
		you specified above.
	• Select Days — The system will power up on days selected above at the time
		you specified above.
	It wasn
		NOTE: This feature does not work if you turn off your computer using the switch
		on a power strip or surge protector or if Auto Power is set to disabled.
Deep Sleep Control	Allows you to define the controls when Deep Sleep is enabled.
	•	Disabled
	• Enabled in S5 only
	• Enabled in S4 and S5
	This option is disabled by default.
Fan Control Override	Controls the speed of the system fan.
	• Fan Control Override (not selected)
		NOTE: When enabled, the fan runs at full speed.
USB Wake Support	This option allows you to enable USB devices to wake the computer from standby.
	• Enable USB Wake Support (not selected by default)
Wake on LAN/WLAN	This option allows the computer to power up from the off state when triggered by a
	special LAN signal. Wake-up from the Standby state is unaffected by this setting and
	must be enabled in the operating system. This feature only works when the computer
	is connected to AC power supply. The options differ based on the form factor.
	• Disabled (selected by default) — Does not allow the system to power on by
		special LAN signals when it receives a wake-up signal from the LAN or
		wireless LAN.
	• LAN Only — Allows the system to be powered on by special LAN signals.
	• WLAN Only — Allows the system to be powered on by special WLAN signals.
	• LAN or WLAN — Allows the system to be powered on by special LAN or
		WLAN signals.
Block Sleep	This option lets you block entering to sleep (S3 state) in operating system
	environment.

60

Image 60

Dell W04C OptionDescription, Auto On Time, Deep Sleep Control, Fan Control Override, USB Wake Support, Wake on LAN/WLAN

Contents

Dell OptiPlex 9010 All-In-One Touch Owners Manual Regulatory Model W04C Regulatory Type W04C001Notes, Cautions, and Warnings 2013 Dell Inc. All Rights ReservedContents 2 Removing and Installing Components1 Working on Your Computer Installing the Input/Output Board Shield 3 System Setup4 Diagnostics 5 Troubleshooting Your ComputerTechnical Specifications Contacting DellPage Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your ComputerImportant Information NOTE Avoid using the touchscreen in dusty, hot, or humid environmentsPage Removing and Installing Components 1. Follow the procedures in Before Working Inside Your ComputerRecommended Tools Removing the Video Electronics Standards Association VESA StandInstalling the VESA Stand 4. Follow the procedures in After Working Inside Your ComputerRemoving the Back Cover 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Back Cover Removing the Memory4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Memory 5. Follow the procedures in After Working Inside Your ComputerRemoving the VESA Mount Bracket 1. Follow the procedures in Before Working Inside Your ComputerInstalling the VESA Mount Bracket Removing the Touchscreen Board4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Touchscreen Board Installing the Converter Board6. Follow the procedures in After Working Inside Your Computer Removing the Converter BoardInstalling the System-Board Shield Removing the Coin-Cell BatteryRemoving the System-Board Shield 5. Follow the procedures in After Working Inside Your ComputerInstalling the Coin-Cell Battery Removing the Optical Drive4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computer5. Lift the optical drive from the computer Installing the Optical Drive 7. Follow the procedures in After Working Inside Your ComputerRemoving the Hard Drive 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Hard Drive Removing the Intrusion Switch6. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Intrusion Switch Removing the Wireless Local Area Network WLAN Card Installing the WLAN CardRemoving the Power-Supply Fan 4. Follow the procedures in After Working Inside Your ComputerInstalling the Power-Supply Fan 5. Follow the procedures in After Working Inside Your ComputerRemoving the Power Supply Unit PSU 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Power Supply Unit Removing the Heat-Sink AssemblyInstalling the Heat-Sink Assembly 6. Follow the procedures in After Working Inside Your ComputerRemoving the Input/Output Board Shield 4. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer 7. Disconnect the power-connector cable 6. Flip the input/output board shield and remove it from the computerInstalling the Input/Output Board Shield Removing the Power-Button Board7. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Power-Button Board Removing the Processor Fan4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Processor Fan Installing the ProcessorRemoving the Processor 4. Follow the procedures in After Working Inside Your ComputerRemoving the Speakers 1. Follow the procedures in Before Working Inside Your Computer2. Remove the a VESA stand b back cover c VESA mount bracket d system-board shieldInstalling the Speakers Removing the System Board4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerSystem Board Layout 5. Lift and remove the system board from the chassisThe following image displays the system board layout of the computer Installing the System Board Jumper Settings Clearing the CMOS PasswordDisabling the Password 4. Follow the procedures in After Working Inside Your Computer11. Follow the procedures in After Working Inside Your Computer Removing the Display Panel1. Follow the procedures in Before Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computerl power-supply fan m power supply unit n heat-sink assembly 5. Peel off the tape that adheres the connectors to the display panelo processor fan p speakers q antenna module r system board 7. Lift and remove the display panel from the middle frame Page Installing the Display Panel 9. Follow the procedures in After Working Inside Your ComputerRemoving the Antenna Modules 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Antenna Modules Removing the Camera4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Camera d heat-sink assembly e power supply unit f processor fan g converter board h power-button board i intrusion switch5. Follow the procedures in After Working Inside Your Computer j hard drive k optical drive l WLAN card m input/output board shieldSystem Setup Boot SequenceNavigation Keys System Setup Options - BIOS Setup Boot List Option Table 4. Security Allows you to bypass the System Password and the internal HDD password prompts Enable CPU XD Support selected by default Table 6. Power Management LAN or WLAN - Allows the system to be powered on by special LAN or Table 9. Wireless Table 10. MaintenanceTable 11. Image Server System Setup Options For Windows 8 only Displays the subnet mask of the client. The default setting isTable 12. System Logs Table 13. GeneralOption This option lets you enable or disable various drives on board. By default the options Strong Password Password Configuration Table 15. SecurityOption Table 16. Secure Boot Table 18. Power ManagementTable 17. Performance OptionDescription Auto On TimeDeep Sleep Control Fan Control OverrideTable 21. Wireless Table 19. POST BehaviorTable 20. Virtualization Support Table 22. Maintenance Table 23. Image ServerUpdating the BIOS System and Setup Password Assigning a System Password and Setup PasswordDeleting or Changing an Existing System and/or Setup Password Page Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsPower Supply Built in Self-Test Page Troubleshooting Your Computer Diagnostic Power LED CodesImportant Information Error Messages Beep CodesHard-disk drive read the F1 key to continue, F2 to run the setup utility No boot device availablePage Technical Specifications Volume up/down buttons, program menus, and keyboard media Table 28. AudioTable 29. Communications Table 30. CardsFeature SpecificationFeature SpecificationTable 37. Physical Dimensions NOTE The weight of your computer may vary depending onthe configuration ordered and the manufacturing variability White light - Solid white light indicates power-on state blinkingFeature SpecificationTable 39. Environmental Page Contacting Dell 4. Select the appropriate service or support link based on your need1. Visit support.dell.com 3. Click Contact Us on the left side of the page