Option | Description | |
|
| |
USB Configuration | This field configures the integrated USB controller. If Boot Support is enabled, the | |
| system is allowed to boot any type of USB mass storage devices (HDD, memory key, | |
| floppy). |
|
| If USB port is enabled, device attached to this port is enabled and available for | |
| operation system. | |
| If USB port is disabled, the operation system cannot see any device attached to this | |
| port. |
|
| • | Enable Boot Support |
| • Enable Front USB Ports | |
| • Enable Rear Dual USB Ports | |
| • Enable Rear Triple USB Ports | |
Miscellaneous Devices | Allows you to enable or disable various | |
| • | Enable/Disable Microphone |
| • | Enable/Disable Camera |
| • | Enable/Disable Media Card |
Table 4. Security |
|
|
|
| |
Option | Description | |
|
| |
Admin Password | This field lets you set, change, or delete the administrator (admin) password | |
| (sometimes called the setup password). The admin password enables several | |
| security features. | |
| The drive does not have a password set by default. | |
| • Enter the old password | |
| • Enter the new password | |
| • Confirm the new password | |
| Click OK after entering the password details. | |
System Password | Allows you to set, change, or delete the computer password (previously called the | |
| primary password). | |
| The drive does not have a password set by default. | |
| • Enter the old password | |
| • Enter the new password | |
| • Confirm the new password | |
| Click OK after entering the password details. | |
Internal | Allows you to set, change, or delete the password on the computer's internal hard | |
disk drive (HDD). Successful changes to this password take effect immediately. The drive does not have a password set by default.
• Enter the old password
• Enter the new password
• Confirm the new password
Click OK after entering the password details.
48
