Niles Audio SI-1650 manual Configuring Your System, Connecting For Configuration, Windows XP

16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS

CONFIGURING YOUR SYSTEM

The SI-1650 includes a Configuration and Setup Tool that provides easy access to the all essential features of the amplifier using the web browser on a laptop, PC, iPad , tablet or smartphone (e.g. IE, Firefox, Chrome, Safari, etc.).

CONNECTING FOR CONFIGURATION

A direct wired Ethernet connection or a local area network connection to the RJ- 45 network connector on the rear panel of the SI-1650 is necessary to access the SI-1650 Configuration and Setup Tool using a web browser.

DIRECT ETHERNET CONNECTION

A direct Ethernet connection is made by connecting the RJ-45 network connector of a PC directly to the RJ-45 network connector on the rear panel of the SI-1650. Use the numbered steps below to establish network communication between a PC and the SI-1650 when using a direct wired Ethernet connection.

Note: A crossover network cable is not required when using a direct wired Ethernet connection as the SI-1650’s network connector is auto sensing.

Windows XP

1.Select Windows Control Panel > Network Connections.

2.Right click Local Area Network and select properties.

3.Highlight Internet Protocol (TCP/IP) in the connections list and then select properties.

4.Set a unique IP address compatible with the factory default IP address http://192.168.1.1 (e.g 192.168.1.220)

5.Set Subnet to 255.255.255.0

Windows 7

1.Select Windows Control Panel > Network and Internet > Network and Sharing Center.

2.Select Change Adapter Settings.

3.Right click Local Area Connection and select Properties.

4.Highlight Internet Protocol Version 4 (TCP/IPv4) in the connections list and then select Properties.

5.Set a unique IP address compatible with the factory default IP address http://192.168.1.1 (e.g 192.168.1.220)

6.Set Subnet to 255.255.255.0

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-760-710-0992 17