16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS

TROUBLE-SHOOTING GUIDE

Symptom

Possible Causes and Test Procedure

Sound is distorted on one or all of the channels at normal volumes

Check your configuration worksheet and verify all settings.

Normal volume cannot

One of the internal amplifier fuses is blown. (Return the amplifier to your dealer for service).

be reached

 

Bass sound is weak

Check that the bridging switch is “Off”. If two adjacent channels are connected normally but

the bridging switch is set to the “Bridged” position, the two speakers will play out of phase

and the stereo image is

with each other.

“phasey” sounding in

 

one room

The loudspeakers are wired out of phase. Reverse the connections at the back of one speaker.

 

BY PHONE (IN USA)

1-800-BUY-HIFI (289-4434)

BY PHONE (OUTSIDE USA)

1-760-710-0992

CUSTOMER SERVICE HOURS

8:00 AM to 5:30 PM PT

TECHNICAL SUPPORT HOURS

6:00 AM to 4:00 PM PT

ON THE WEB

www.nilesaudio.com

EMAIL TECHNICAL SUPPORT

techsupport@nilesaudio.com

EMAIL FOR PRODUCT SUGGESTIONS

productsuggestions@nilesaudio.com

NILES AUDIO CORPORATION – 1-800-BUY-HIFI1-760-710-0992

 

39

 

Page 39
Image 39
Niles Audio SI-1650 manual Buy-Hifi