16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS
CONFIGURATION AND SETUP TOOL
AMPLIFIER CONFIGURATION MAIN SELECTION – SIGNAL ROUTING SUB SELECTION
Choose the Signal Routing sub selection and the Signal Routing page is displayed. All 16 amplifier channels are listed on the left with their names and currently selected input shown to the right.
Note: Even numbered channels are listed inactive if their adjacent odd numbered channel is set to 100 watts (e.g. when channel 15 set to 100 watts, channel is 16 listed as inactive).
1.Use the pull down list of available inputs to assign a different input signal to any channel. All available inputs and possible input combinations are included in the pull down list along with their names (e.g. inputs 1 through 16, inputs 1+2, inputs 3+4, inputs 5+6, etc.).
2.Select Save to save Signal Routing to the amplifier’s memory.
FIGURE 12
NILES AUDIO CORPORATION – |
| 23 |
|
