16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS
INSTALLATION
THE CONTROL OUTPUT
This terminal provides a 12V DC signal suitable for triggering Niles automated switchers, some motorized screens, some electric curtain controls, etc. This voltage is present only when the amplifier is active or on. When the amplifier turns off, the 12V signal is off.
STEP | DESCRIPTION |
1.Check the requirements of the device you want to control.
The control output has a maximum current capability of 150 mA.
2.Connect the 3.5 mm Jack to the control output maintaining proper polarity
(tip = +).
Niles makes an accessory cable plug FG00724.
NILES AUDIO CORPORATION – |
| 35 |
|
