16 CHANNEL, FULLY CONFIGURABLE POWER AMPLIFIERS

SYSTEM DESIGN CONSIDERATIONS

CABLE AND WIRE

Because the SI-1650 has many connections on the rear panel (see page 32 & 33), it is important that you correctly label all of the input cables and speaker wires. Label the cables and wires with their destination or source, rather than the SI-1650 terminal to which they are connected. This will make it easier to reconfigure your system in the future.

The SI-1650 connects to your sources via shielded line level audio cables with RCA connectors. Use high quality cables with your Niles amplifier for the lowest possible noise and best overall performance. Your Niles dealer can recommend the proper cable.

The SI-1650 connects to your speakers using two conductor speaker wire. For most applications, we recommend you use 16 or 18 gauge wire. For wiring runs longer than 80 feet, we recommend 14 gauge wire. The SI-1650’s high- quality, gold-plated 5-way binding posts will accommodate up to 12-gauge wire. Attaching banana plugs to the wire will enable the connection of larger wire sizes.

USING MONO FOR SMOOTHER COVERAGE

In large or irregularly shaped rooms, you may find that the main listening area may be closer to one of the speakers. If the speakers in the room are connected to a stereo amplifier you will only hear half the music. The SI-1650’s BusMatrix™ enables you to create mono sound from one speaker without impacting the stereo quality in the rest of the system. You can configure each amplifier channel individually to Left, Right or mono as needed with no ill effects. Some of the most popular areas where mono will greatly enhance the sound quality would be:

Large rooms with many seating areas and/or many pairs of speakers.

Irregularly shaped rooms.

Bathrooms with one speaker over the tub and one speaker over the sink(s).

Hallways or passageways (including those with multiple speakers).

Small rooms, such as walk-in closets where more than a single speaker is not required.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI1-760-710-0992

 

9

 

Page 9
Image 9
Niles Audio SI-1650 manual System Design Considerations