DIMENSIONAL DRAWING

SYMBOL INDICATES CENTER OF BALANCE.

 

45.00

 

 

 

43.00

 

 

 

CL

 

 

14.50

 

 

 

 

3X GRILLES

 

 

 

PARTIALLY SHOWN

 

 

 

FRONT

2X .18 X 24.00

 

 

 

RUNNERS

 

 

 

6.62

.66

HANDLE

CL

INPUT

 

7.00

 

 

 

 

 

 

3.62

 

 

10.00

 

.85

 

 

 

BACK

ACCESS

2X STACK

 

PANEL

1.25

PAD

 

 

TOP AND

 

POCKET

CL

BOTTOM

 

 

 

 

31.00

24.50

 

 

 

 

 

 

17.00

1.50

 

TOP

4X EAW

 

 

 

 

 

PROPIETARY

DIMENSIONS APPLY TO

RIGGING

TOP AND BOTTOM

SYSTEM

 

SPECIFICATIONS KF760

A & E SPECIFICATIONS

The tri-amplified, three-way full range loudspeaker system shall incorporate 2x 12-in LF transducers, 2x 10-in horn- loaded cone transducers with Radial Phase Plug™ and 2x 2-in exit/3-in voice coil compression drivers also horn-loaded.

The LF transducers shall each be loaded into a proprietary bent-horn, with the horn mouths horizontally separated to provide controlled off-axis cancellations to match the MF beamwidth through the crossover region. The MF transducers shall both be coupled into a single large format horn. The HF transducers shall each be coupled to an HF horn coaxially mounted with, and extended by, the MF horn. The system shall have a nominal dispersion pattern of 80° (h) when used as part of a KF760 line array.

System frequency response shall vary no more than ±3 dB from 80Hz to 16kHz measured on axis. The single loudspeaker’s subsystems (LF/MF/HF) shall produce Sound Pressure Level (SPL) of 96/108/113 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak out- put of 135/142/144 dB SPL on axis at 1 meter. The eight (8) enclosure array loudspeaker subsystems (LF/MF/HF) shall pro- duce SPL of 106/125/117 dB SPl on axis at 1 meter with a power of 1 Watt, and shall be capable of a peak output of 154/169/156 dB SPL on axis at 1 meter. The subsystems (LF/MF/HF) shall handle 2000/800/300 Watts of amplifier power (continuous) and shall have nominal impedances of 2x 8/8/8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of void-free cross-grain-laminated Baltic birch plywood, and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connector shall be a Neutrik NL8 with an additional NL8 pro- vided for connect through. Proprietary rigging is provided for arraying. The front of the loudspeaker shall be covered with a powder coated perforated steel grille.

 

29.75

 

4X .875 SQ

7.88

14.50

CL

 

4X HANDLES

RIGHT SIDE

DIMENSIONS APPLY TO

BOTH SIDES

509120 (0) 6/28/01

8.61

12.88

6.96

The tri-amplified, three-way full range loudspeaker system shall be the EAW model KF760.

PHYSICAL continued

Dimensions

inches

millimeters

Front Height

14.5

368

Rear Height

12.9

327

Width

45.0

1143

Depth

31.0

787

Trapezoid Angle

1.5 degrees top & bottom

Weights

pounds

kilograms

Net Weight

241

109.3

Shipping Weight

251

113.9

Manufacturing tolerances are +/- 0.13 and +/- 1°

One

Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

info@eaw. com

www.eaw. com

EAW

products are continually improved. All specifications are therefore subject to change without notice.

KF760/0002962/2 pp

April 2002

Printed in USA

Page 2
Image 2
EAW KF760 specifications Dimensional Drawing, Specifications, Inches Millimeters, Pounds Kilograms

KF760 specifications

The EAW KF760 is a cutting-edge loudspeaker system designed for high-performance applications in live sound settings as well as installations. It is renowned for its exceptional audio fidelity, robust construction, and versatility, making it a favorite among sound engineers and acoustic professionals.

One of the standout features of the KF760 is its two-way design that combines a 12-inch low-frequency driver with a versatile high-frequency compression driver. This configuration ensures balanced sound reproduction across a wide frequency range, delivering deep, impactful bass and crisp, clear highs. The speaker is capable of producing a maximum SPL (Sound Pressure Level) of around 136 dB, allowing it to handle large venues with ease.

The KF760 is equipped with advanced technologies that enhance its performance. Among these is the Wavefront Control technology, which ensures consistent sound coverage across all seating areas. This is crucial in large spaces where sound dispersion can be uneven. The speaker’s design also minimizes distortion, even at high volume levels, providing listeners with an uncompromised audio experience.

Another important characteristic of the KF760 is its modular design, which permits seamless integration with other EAW systems. This allows sound engineers to configure the system according to the specific demands of a venue, as it can be easily coupled with additional KF760 units or other models from the EAW lineup. The speaker cabinet is constructed from durable Baltic birch plywood, providing longevity and resistance to wear, while the durable finish helps protect it from the rigors of touring or permanent installation.

Moreover, the KF760 features an extensive array of rigging points and accessories that facilitate quick and secure mounting options. This adaptability is essential for diverse applications, ranging from concerts and festivals to corporate events and houses of worship.

Finally, the speaker is designed to be user-friendly, with straightforward connectivity options and intuitive controls, making it accessible for both seasoned professionals and those new to live sound. The EAW KF760 stands out as a powerful solution for anyone seeking to deliver high-quality audio in challenging acoustical environments, solidifying its reputation for performance and reliability.