EAW specifications SPECIFICATIONS KF760, Description, Application, Performance, Physical

SPECIFICATIONS KF760

DESCRIPTION

The KF760 is part of the KF760 Line Array Series. The KF760 Series uses advanced divergence shading where all loud- speakers are powered at equal level. A full KF760/KF761 array can provide uniform sound coverage from directly beneath itself out to hundreds of feet without complex signal pro- cessing. Vertical coverage for the array is set by varying the splay of the rear of the enclosures, leaving the fronts tight- packed. This configuration produces a continuous, coherent wavefront from the array, projecting extended range, high- resolution sound over its full coverage area.

Quality construction features include, Baltic birch plywood enclosures, heavy-duty steel grilles, Neutrik NL8 connectors, heavy duty bar handles, rear hand-holds, and accessory cast- er pallets. Six Year Warranty.

APPLICATION

This high output touring system is scalable from theaters under 1,000 seats to stadiums. The KF760 is used as the short to long throw element of a KF760 Series line array providing coverage in the range of 70 to 400 feet. The KF761 supple- ments the KF760s to provide near-field coverage for distances less than 70 feet. The recommended minimum KF760/KF761 array size is four enclosures. For full performance eight enclo- sures are recommended. To extend the low frequency response, KF940 SuperSubs™ make an ideal complement to the KF760 Series.

Applications include:
Arenas	Convention Centers	Large Ballrooms
Stadiums	Theaters	Music Pavilions
Auditoriums	Outdoor Events

Power Handling (Watts Continuous)

LF	2000
MF	800
HF	300
Recommended High-Pass Frequency
24dB/Octave	40 Hz
Calculated Maximum Output (dB SPL @ 1m)
Single Enclosure
LF Peak/Long Term	135/129
MF Peak/Long Term	142/136
HF Peak/Long Term	144/138
Eight (8) Enclosure Array
LF Peak/Long Term	154/148
MF Peak/Long Term	169/163
HF Peak/Long Term	156/150

Nominal Coverage Angle -6 dB points (degrees)

Horizontal	80
Maximum Vertical Splay	3

PERFORMANCE

Frequency Response (Hz)
±3 dB (1) Enclosure Array		80 Hz to 16 kHz
±3 dB (8)	Enclosure Array	40 Hz to 16 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF Single Enclosure		96
MF Single Enclosure		108
HF Single Enclosure		113
LF (8)	Enclosure Array	106
MF (8)	Enclosure Array	125
HF (8)	Enclosure Array	117
Impedance (Ohms)
	LF	2x 8
	MF	8 (2@ 16 Ohm each)
	HF	8 (2@ 16 Ohm each)

PHYSICAL

Product Group

System Configuration

Powering

LF Subsystem

MF Subsystem

HF Subsystem

Enclosure (shape)

Enclosure Materials

Finish

Connectors

Suspension Hardware

Grille

S

3-way, full range

Tri-amplified

2x 12-in woofers, horn-loaded

2x 10-in cone, Radial Phase Plug™, horn-loaded

2x 2-in exit/3-in voice coil compression driver, horn-loaded

Horizontal trapezoid

Exterior grade Baltic birch ply- wood, urethane

Wear-resistant black textured paint

2x Neutrik NL8

Proprietary EAW rigging system

Powder coated perforated steel

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			KF760/0002962/2 pp	April 2002	Printed in USA