English - 17
adjusting the Volume automatically
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. this feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
1. Press the MEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the EntEr button.
2. Press the ▲ or ▼ button to select "Auto Volume", then press the EntEr button.
3. Press the ▲ or ▼ button to select "On" or "Off".
Press the EntEr button.
4. Press the Exit button to exit.
Selecting the Sound Mode
You can also set these
options simply by pressing the
dual i-ii
button on remote
control.
You can set the sound mode by pressing the “dual i-ii”
button.
When you press it, the current sound mode is displayed on
the screen.
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
DUAL 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
DUAL 1
DUAL 1
Automatic
change
Automatic
change
A2
Stereo
NICAM
Stereo
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
You can connect a set of headphones to your set if you wish to
watch a tV programme without disturbing the other people in the
room.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
Connecting headphones
Sound
Move Enter return
Mode : Music
Custom
auto Volume : off
auto Volume
Move Enter return
off
on
BN68-01287A-01Eng-0528.indd 17 2007-05-30 �� 8:35:16