English - 8
When the tV is initially powered on, several basic settings
proceed automatically and subsequently. the following
settings are available.
1. Press the PoWEr button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the EntEr button to confirm your choice.
3.
The message “Check antenna input.” is displayed with “OK” selected.
Press the EntEr button.
Please check that the antenna or cable TV is connected correctly.
4. Select the appropriate country by pressing the ▲ or ▼ button.
Press the EntEr button to confirm your choice.
5.
The "Auto Store" menu is displayed with the "Start" selected. Press the
EntEr
button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the EntEr button at any time to interrupt the memorization process.
6. Press the EntEr button.
Select the “Hour”, “Minute” or "am/pm" by pressing the
◄
or
►
button.
Set the “Hour”, “Minute” or "am/pm" by pressing the
▲
or
▼
button.
You can also set the hour and minute by pressing the number buttons on the remote control.
7. Press the EntEr button to confirm your setting.
The message “Enjoy your watching.” is displayed.
language
: Select your language.
area
:
Select your country.
auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Plug & Play
Enter Exit
Start Plug & Play.
oK
if you want to reset this feature...
1. Press the MEnu button to display the menu.
Press the
▲
or
▼
button to select "Setup", then press the
EntEr button.
2. Press the EntEr button again, to select "Plug & Play".
3. The message to "Start Plug & Play" is displayed.

- Storing Channels Automatically

- Storing Channels Manually

Setup
Move Enter return
Plug & Play
language : English
time
Blue Screen : off
PC
BN68-01287A-01Eng-0528.indd 8 2007-05-30 �� 8:35:09